diff --git a/.vscode/settings.json b/.vscode/settings.json
index 1eb8153..78cba18 100644
--- a/.vscode/settings.json
+++ b/.vscode/settings.json
@@ -1,5 +1,7 @@
 {
 	"editor.tabSize": 4,
+	"editor.formatOnSave": false,
+	"editor.defaultFormatter": null,
 	"editor.insertSpaces": true,
 	"editor.detectIndentation": false,
 	"git.mergeEditor": false,
@@ -14,6 +16,7 @@
 		"gcode",
 		"githubstar",
 		"hotend",
+		"KAMP",
 		"KIAUH",
 		"Klipper",
 		"Klipperized",
diff --git a/printer.cfg b/printer.cfg
index d9ce932..e3c0909 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -96,7 +96,7 @@ diag_pin: PA7
 step_pin: PB4
 dir_pin: !PB3
 enable_pin: !PC3
-microsteps: 256
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
 nozzle_diameter: 0.400
 filament_diameter: 1.750
@@ -182,9 +182,9 @@ encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
 [input_shaper]
-shaper_freq_x: 55.0 # 97.2 # 82.2 # 84.2; 4020
+shaper_freq_x: 56.6 # 55.0 # 97.2 # 82.2 # 84.2; 4020
 shaper_type_x: mzv # 3hump_ei # 2hump_ei
-shaper_freq_y: 40.6 # 41.8; 4020
+shaper_freq_y: 48.4 # 40.6 # 41.8; 4020
 shaper_type_y: mzv
 
 [bed_screws]
@@ -245,7 +245,7 @@ runout_gcode:
 #*# pid_kd = 928.332
 #*#
 #*# [probe]
-#*# z_offset = 1.285
+#*# z_offset = 1.345
 #*#
 #*# [bed_mesh personalPreEdit]
 #*# version = 1
@@ -271,26 +271,7 @@ runout_gcode:
 #*# compensation_start_x = 27.0
 #*# compensation_end_x = 195.0
 #*#
-#*# [bed_mesh default-preXTwist-fix]
-#*# version = 1
-#*# points =
-#*# 	-0.150000, -0.110000, -0.110000, -0.130000, -0.130000
-#*# 	-0.165000, -0.130000, -0.130000, -0.130000, -0.130000
-#*# 	-0.165000, -0.112266, -0.110000, -0.130000, -0.130000
-#*# 	-0.160000, -0.105430, -0.110000, -0.130000, -0.130000
-#*# 	-0.120000, -0.071211, -0.091407, -0.110000, -0.110000
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*#
-#*# [bed_mesh default]
+#*# [bed_mesh default-preNewNozzle]
 #*# version = 1
 #*# points =
 #*# 	-0.038051, -0.033174, -0.038453, -0.061829, -0.123230
@@ -298,6 +279,25 @@ runout_gcode:
 #*# 	-0.108832, -0.063955, -0.058921, -0.063704, -0.125261
 #*# 	-0.123363, -0.074580, -0.063296, -0.081360, -0.140261
 #*# 	-0.074145, -0.020830, -0.011578, -0.024954, -0.074948
+#*# min_x = 27.0
+#*# max_x = 222.0
+#*# min_y = 6.0
+#*# max_y = 203.0
+#*# x_count = 5
+#*# y_count = 5
+#*# mesh_x_pps = 2
+#*# mesh_y_pps = 2
+#*# algo = lagrange
+#*# tension = 0.2
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	0.004384, -0.020865, -0.050803, -0.081005, -0.130833
+#*# 	-0.029366, -0.045709, -0.062678, -0.087255, -0.143646
+#*# 	-0.062178, -0.050084, -0.070178, -0.089755, -0.141302
+#*# 	-0.073897, -0.061647, -0.068459, -0.097411, -0.140521
+#*# 	-0.023428, -0.003678, -0.016740, -0.038661, -0.074427
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2