PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

More changes pulled from personal.

Browse Source
This commit is contained in:
Bassam Husain
2023-03-14 18:45:30 -04:00
parent 64a6f98fe4
commit c967be1023
1 changed files with 27 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
cfgs/misc-macros.cfg
View File

@@ -15,15 +15,36 @@ path: /home/pi/printer_data/gcodes
[display_status]
[gcode_macro _globals]
variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_pre_purge_prime_length: 1.4
gcode:
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
[gcode_macro CHECK_PRE_PURGE_PRIME_LENGTH]
[gcode_macro CONDITIONAL_BEEP]
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length %}
{% if not PRE_PURGE_PRIME_LENGTH %}
{action_raise_error('Pre purge prime length not found')}
# Parameters
{% set i = params.I|default(1)|int %} ; Iterations (number of times to beep).
{% set dur = params.DUR|default(100)|int %} ; Duration/wait of each beep in ms. Default 100ms.
{% set freq = params.FREQ|default(2000)|int %} ; Frequency in Hz. Default 2kHz.
{% set BEEPING_ENABLED=printer["gcode_macro _globals"].beeping_enabled|default(-1)|int %}
{% if BEEPING_ENABLED == 1 %}
BEEP I={i} DUR={dur} FREQ={freq}
{% endif %}
[gcode_macro ADJUST_FILAMENT_SENSOR_STATUS]
gcode:
# Parameters
{% set NEWSTATUS = params.ENABLE|default(-1)|int %}
{% set FILAMENT_SENSOR_ENABLED=printer["gcode_macro _globals"].filament_sensor_enabled|default(-1)|int %}
{% if FILAMENT_SENSOR_ENABLED == 1 and NEWSTATUS != -1 %}
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %}
[gcode_macro M109]
@@ -52,8 +73,8 @@ gcode:
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length %}
CHECK_PRE_PURGE_PRIME_LENGTH
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
G0 Y0 X0 F4000 ; go to tongue of print bed
G1 Z0.4 F500.0 ; move bed to nozzle
G92 E0.0 ; reset extruder