diff --git a/cfgs/adxl-rp2040.cfg b/cfgs/adxl-rp2040.cfg
index bf02a8e..54243f4 100644
--- a/cfgs/adxl-rp2040.cfg
+++ b/cfgs/adxl-rp2040.cfg
@@ -1,22 +1,24 @@
 #####################################################################
+#   Here's how to set up your RP2040-zero
 #   ADXL345 related Settings 
 #   https://www.klipper3d.org/Measuring_Resonances.html#adxl345
 #####################################################################
 
-[mcu rp2040]
+[mcu RP2040]
 baud: 115200 # 250000
 restart_method: command
 # Obtain definition by "ls -l /dev/serial/by-id/"
 serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
 
 [adxl345]
-spi_software_miso_pin: rp2040:gpio8
-cs_pin: rp2040:gpio9
-# spi_bus: spi0b
-spi_software_sclk_pin: rp2040:gpio10
-spi_software_mosi_pin: rp2040:gpio11
-axes_map: x,y,z
+cs_pin: RP2040:gpio1
+spi_bus: spi0a
 
 [resonance_tester]
 accel_chip: adxl345
-probe_points: 111.5, 111.5, 20
\ No newline at end of file
+probe_points: 111.5, 111.5, 20
+
+[gcode_macro ADX]
+description: Shortcut to ACCELEROMETER_QUERY
+gcode:
+    ACCELEROMETER_QUERY
diff --git a/printer.cfg b/printer.cfg
index d863592..70e44fa 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -168,10 +168,10 @@ encoder_pins: ^PB14, ^PB10
 click_pin: ^!PB2
 
 [input_shaper]
-shaper_freq_x = 56.0
-shaper_type_x: mzv
-shaper_freq_y = 59.0
-shaper_type_y: 3hump_ei
+shaper_freq_x = 102.2
+shaper_type_x: 3hump_ei # mzv
+shaper_freq_y = 41.8 # 59.0
+shaper_type_y: mzv # 3hump_ei
 
 [bed_screws]
 screw1: 26.5, 31