PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust readme.md: many sections.

Browse Source
This commit is contained in:
Bassam Husain
2023-08-26 16:52:14 -04:00
parent 5b5c58fa05
commit c0ed25bb3a
1 changed files with 8 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
README.md
View File

@@ -36,7 +36,8 @@ I am creating these files for my personal use and cannot be held responsible for
- 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥 - 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
- Filament runout sensor usage implemented. - Filament runout sensor usage implemented.
- Minimum configuration settings for Mainsail/Fluiddpi to work. - Minimum configuration settings for Mainsail/Fluiddpi to work.
- SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). Find the differences between the different print setting profiles [here](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles/tree/master/SuperSlicer). But basically, the 45 degree profile places the seam at the back. - A SuperSlicer config bundle that contains the printer configurations for the SV06/Plus, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)).
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> A PrusaSlicer config bundle based on Ellis' SuperSlicer Profiles.
- Bed model and texture to use in SuperSlicer/PrusaSlicer. - Bed model and texture to use in SuperSlicer/PrusaSlicer.
- Macros - Macros
- **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration. - **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration.
@@ -44,8 +45,8 @@ I am creating these files for my personal use and cannot be held responsible for
- Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`. - Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`.
- Load/unload filament macros. - Load/unload filament macros.
- `PURGE_LINE` macro. - `PURGE_LINE` macro.
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> `TEST_SPEED` macro. <img src="./images/party_blob.gif" width="20" alt=''/> Find instructions [here](#how-do-i-use-the-test_speed-macro). - `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro).
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! <img src="./images/party_blob.gif" width="20" alt=''/> Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging). - `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging).
## Stay Up-to-Date ## Stay Up-to-Date
@@ -57,16 +58,16 @@ Watch for releases and updates.
## Preface ## Preface
Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience. Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and _fully read all the documentation on this page_. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
## Before You Begin ## Before You Begin
- Read this documentation _fully!_ - Read this documentation _fully!_
- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned. - Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Beginner's would be wise to go through the steps mentioned [here](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md). Consider yourself warned.
- Follow the steps in order. - Follow the steps in order.
- If an error was reported at a step, do no proceed to the next step. - If an error was reported at a step, do no proceed to the next step.
- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking. - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/parts/README.md#put-tape-on-the-5v-pin) the USB cable's 5V pin. - [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#put-tape-on-the-5v-pin) the USB cable's 5V pin.
- It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`. - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). - Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
- Robert Redford's performance in _Spy Game (2001)_ was superb! - Robert Redford's performance in _Spy Game (2001)_ was superb!
@@ -249,7 +250,7 @@ If you found my work useful, consider buying me a [<img src="./images/logo_white
## FAQ ## FAQ
##### How do I import a SuperSlicer configuration bundle (`SuperSlicer_config_bundle.ini`) into SuperSlicer? ##### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13). Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).