diff --git a/macros/MECHANICAL_GANTRY_CALIBRATION.cfg b/cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg
similarity index 100%
rename from macros/MECHANICAL_GANTRY_CALIBRATION.cfg
rename to cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg
diff --git a/macros/PARKING.cfg b/cfgs/PARKING.cfg
similarity index 100%
rename from macros/PARKING.cfg
rename to cfgs/PARKING.cfg
diff --git a/macros/adxl-direct.cfg b/cfgs/adxl-direct.cfg
similarity index 100%
rename from macros/adxl-direct.cfg
rename to cfgs/adxl-direct.cfg
diff --git a/macros/adxl-rp2040.cfg b/cfgs/adxl-rp2040.cfg
similarity index 100%
rename from macros/adxl-rp2040.cfg
rename to cfgs/adxl-rp2040.cfg
diff --git a/macros/beeper.cfg b/cfgs/beeper.cfg
similarity index 100%
rename from macros/beeper.cfg
rename to cfgs/beeper.cfg
diff --git a/macros/macros.cfg b/cfgs/macros.cfg
similarity index 100%
rename from macros/macros.cfg
rename to cfgs/macros.cfg
diff --git a/misc/PrusaSlicer_config_bundle-Sovol-SV06.ini b/misc/PrusaSlicer_config_bundle-Sovol-SV06.ini
deleted file mode 100644
index c2cc4e1..0000000
--- a/misc/PrusaSlicer_config_bundle-Sovol-SV06.ini
+++ /dev/null
@@ -1,882 +0,0 @@
-# generated by PrusaSlicer 2.5.0+win64 on 2022-12-16 at 14:16:39 UTC
-
-[print:0.08mm SUPER FINE @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 8
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 15
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.08
-max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.24
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.33
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 40
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 11
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.16mm FINE @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 5
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.16
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.22
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 8
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm Flow check @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0
-fill_angle = 45
-fill_density = 0%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 1
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 2
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 1
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 1
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thick_bridges = 1
-thin_walls = 0
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 0
-top_solid_layers = 0
-top_solid_min_thickness = 0.8
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 149.355
-wipe_tower_y = 189.199
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL @Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 1
-support_material_closing_radius = 2
-support_material_contact_distance = 0.25
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 0
-top_solid_layers = 6
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.28mm DRAFT@Sovol Sv06]
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = "Sovol Sv06"
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 0
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.5
-fill_angle = 45
-fill_density = 15%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.28
-first_layer_speed = 15
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 0
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.28
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 2
-max_volumetric_extrusion_rate_slope_positive = 2
-max_volumetric_speed = 13
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_SOVOL.gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 0
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.24
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
-thick_bridges = 0
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 0
-top_solid_layers = 4
-top_solid_min_thickness = 0
-travel_speed = 180
-travel_speed_z = 12
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[printer:Sovol Sv06]
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,220x0,220x220,0x220
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
-between_objects_gcode = 
-color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = "Prusament PLA"
-default_print_profile = 0.15mm QUALITY @MK3
-deretract_speed = 0
-end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 1000,960
-machine_max_acceleration_y = 1000,960
-machine_max_acceleration_z = 200,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 200,100
-machine_max_feedrate_y = 200,100
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 4.5,4.5
-machine_max_jerk_x = 8,8
-machine_max_jerk_y = 8,8
-machine_max_jerk_z = 0.4,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0.28
-max_print_height = 250
-min_layer_height = 0.08
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
-printer_settings_id = Sovol Sv06
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.5
-retract_length_toolchange = 4
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
-template_custom_gcode = 
-thumbnails = 32x32,400x300
-thumbnails_format = PNG
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0
-
-[physical_printer:Sv06]
-host_type = octoprint
-preset_name = Sovol Sv06
-preset_names = "Sovol Sv06"
-print_host = 
-printer_technology = FFF
-printhost_apikey = 
-printhost_authorization_type = key
-printhost_cafile = 
-printhost_password = 
-printhost_port = 
-printhost_ssl_ignore_revoke = 0
-printhost_user = 
-
-[presets]
-print = 0.20mm NORMAL @Sovol Sv06
-sla_print = 
-sla_material = 
-printer = Sovol Sv06
-physical_printer = Sv06
diff --git a/misc/SuperSlicer_config_bundle.ini b/misc/SuperSlicer_config_bundle.ini
new file mode 100644
index 0000000..5b9bb13
--- /dev/null
+++ b/misc/SuperSlicer_config_bundle.ini
@@ -0,0 +1,2420 @@
+# generated by SuperSlicer 2.4 on 2023-02-03 at 00:05:10 UTC
+
+[print:Ellis_Decorative_45_Degree_15mm3]
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonicgapfill
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 85%
+bridge_internal_acceleration = 5000
+bridge_overlap = 50%
+bridge_overlap_min = 50%
+bridge_speed = 140
+bridge_speed_internal = 100%
+bridge_type = nozzle
+bridged_infill_margin = 300%
+brim_acceleration = 5000
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_separation = 0
+brim_speed = 50%
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 4000
+default_speed = 100
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+enforce_full_fill_volume = 1
+enforce_retract_first_layer = 0
+ensure_vertical_shell_thickness = 0
+exact_last_layer_height = 0
+external_infill_margin = 4
+external_perimeter_acceleration = 1000
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 0
+external_perimeter_overlap = 100%
+external_perimeter_speed = 80
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_spacing = 
+extrusion_width = 115%
+fill_angle = 0
+fill_angle_increment = 0
+fill_density = 10%
+fill_pattern = monotonic
+fill_smooth_distribution = 10%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 125%
+first_layer_flow_ratio = 100%
+first_layer_height = 0.25
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 3
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 200%
+fuzzy_skin_thickness = 150%
+gap_fill_acceleration = 2000
+gap_fill_enabled = 1
+gap_fill_flow_match_perimeter = 0%
+gap_fill_last = 1
+gap_fill_min_area = 50%
+gap_fill_overlap = 100%
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+hole_size_compensation = 0
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = notconnected
+infill_connection_solid = notconnected
+infill_connection_top = notconnected
+infill_dense = 0
+infill_dense_algo = autoenlarged
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_acceleration = 2000
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_speed = 15
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 20
+min_width_top_surface = 200%
+mmu_segmented_region_max_width = 0
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = 
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+over_bridge_flow_ratio = 100%
+overhangs_acceleration = 2000
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 100%
+overhangs_width = 75%
+overhangs_width_speed = 0
+perimeter_acceleration = 2000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 0
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 150
+perimeters = 3
+post_process = 
+print_custom_variables = wall_thickness_lines = 0
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = Ellis - Decorative 45 Degree (15mm3/s)
+print_temperature = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+resolution_internal = 0.1
+seam_angle_cost = 100%
+seam_position = rear
+seam_travel_cost = 0%
+single_extruder_multi_material_priming = 1
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 140%
+solid_infill_overlap = 100%
+solid_infill_speed = 200
+solid_over_perimeters = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_acceleration = 5000
+support_material_angle = 45
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_acceleration = 5000
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 80%
+thin_perimeters_all = 20%
+thin_walls = 1
+thin_walls_acceleration = 2000
+thin_walls_merge = 1
+thin_walls_min_width = 33%
+thin_walls_overlap = 50%
+thin_walls_speed = 80
+threads = 16
+top_fill_pattern = monotonicgapfill
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_deceleration_use_target = 1
+travel_speed = 350
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_inner_size_compensation = 0
+xy_size_compensation = 0
+
+[print:Ellis_Decorative_Standard_15mm3]
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonicgapfill
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 85%
+bridge_internal_acceleration = 5000
+bridge_overlap = 50%
+bridge_overlap_min = 50%
+bridge_speed = 140
+bridge_speed_internal = 100%
+bridge_type = nozzle
+bridged_infill_margin = 300%
+brim_acceleration = 5000
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_separation = 0
+brim_speed = 50%
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 4000
+default_speed = 100
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+enforce_full_fill_volume = 1
+enforce_retract_first_layer = 0
+ensure_vertical_shell_thickness = 0
+exact_last_layer_height = 0
+external_infill_margin = 4
+external_perimeter_acceleration = 1000
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 0
+external_perimeter_overlap = 100%
+external_perimeter_speed = 80
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_spacing = 
+extrusion_width = 115%
+fill_angle = 45
+fill_angle_increment = 0
+fill_density = 10%
+fill_pattern = monotonic
+fill_smooth_distribution = 10%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 125%
+first_layer_flow_ratio = 100%
+first_layer_height = 0.25
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 3
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 200%
+fuzzy_skin_thickness = 150%
+gap_fill_acceleration = 2000
+gap_fill_enabled = 1
+gap_fill_flow_match_perimeter = 0%
+gap_fill_last = 1
+gap_fill_min_area = 50%
+gap_fill_overlap = 100%
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+hole_size_compensation = 0
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = notconnected
+infill_connection_solid = notconnected
+infill_connection_top = notconnected
+infill_dense = 0
+infill_dense_algo = autoenlarged
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_acceleration = 2000
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_speed = 15
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 20
+min_width_top_surface = 200%
+mmu_segmented_region_max_width = 0
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = 
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+over_bridge_flow_ratio = 100%
+overhangs_acceleration = 2000
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 100%
+overhangs_width = 75%
+overhangs_width_speed = 0
+perimeter_acceleration = 2000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 0
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 150
+perimeters = 3
+post_process = 
+print_custom_variables = wall_thickness_lines = 0
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = Ellis - Decorative Standard (15mm3/s)
+print_temperature = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+resolution_internal = 0.1
+seam_angle_cost = 100%
+seam_position = cost
+seam_travel_cost = 0%
+single_extruder_multi_material_priming = 1
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 140%
+solid_infill_overlap = 100%
+solid_infill_speed = 200
+solid_over_perimeters = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_acceleration = 5000
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_acceleration = 5000
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 80%
+thin_perimeters_all = 20%
+thin_walls = 1
+thin_walls_acceleration = 2000
+thin_walls_merge = 1
+thin_walls_min_width = 33%
+thin_walls_overlap = 50%
+thin_walls_speed = 80
+threads = 16
+top_fill_pattern = monotonicgapfill
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_deceleration_use_target = 1
+travel_speed = 350
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_inner_size_compensation = 0
+xy_size_compensation = 0
+
+[print:Ellis_PIF_45_Degree_15mm3]
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonicgapfill
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 1
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 85%
+bridge_internal_acceleration = 5000
+bridge_overlap = 50%
+bridge_overlap_min = 50%
+bridge_speed = 140
+bridge_speed_internal = 100%
+bridge_type = nozzle
+bridged_infill_margin = 300%
+brim_acceleration = 5000
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_separation = 0
+brim_speed = 50%
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 4000
+default_speed = 100
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+enforce_full_fill_volume = 1
+enforce_retract_first_layer = 0
+ensure_vertical_shell_thickness = 0
+exact_last_layer_height = 0
+external_infill_margin = 4
+external_perimeter_acceleration = 1000
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 100%
+external_perimeter_overlap = 100%
+external_perimeter_speed = 80
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_spacing = 
+extrusion_width = 115%
+fill_angle = 0
+fill_angle_increment = 0
+fill_density = 40%
+fill_pattern = grid
+fill_smooth_distribution = 10%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 125%
+first_layer_flow_ratio = 100%
+first_layer_height = 0.25
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 3
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 200%
+fuzzy_skin_thickness = 150%
+gap_fill_acceleration = 2000
+gap_fill_enabled = 1
+gap_fill_flow_match_perimeter = 0%
+gap_fill_last = 1
+gap_fill_min_area = 50%
+gap_fill_overlap = 100%
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+hole_size_compensation = 0
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 6500
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = notconnected
+infill_connection_solid = notconnected
+infill_connection_top = notconnected
+infill_dense = 0
+infill_dense_algo = autoenlarged
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 160%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_acceleration = 2000
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_speed = 15
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 20
+min_width_top_surface = 200%
+mmu_segmented_region_max_width = 0
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = 
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+over_bridge_flow_ratio = 100%
+overhangs_acceleration = 2000
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 100%
+overhangs_width = 75%
+overhangs_width_speed = 0
+perimeter_acceleration = 2000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 0
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 150
+perimeters = 4
+post_process = 
+print_custom_variables = wall_thickness_lines = 0
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = Ellis - PIF 45 Degree (15mm3/s)
+print_temperature = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+resolution_internal = 0.1
+seam_angle_cost = 100%
+seam_position = rear
+seam_travel_cost = 0%
+single_extruder_multi_material_priming = 1
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 140%
+solid_infill_overlap = 100%
+solid_infill_speed = 200
+solid_over_perimeters = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_acceleration = 5000
+support_material_angle = 45
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_acceleration = 5000
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 80%
+thin_perimeters_all = 20%
+thin_walls = 1
+thin_walls_acceleration = 2000
+thin_walls_merge = 1
+thin_walls_min_width = 33%
+thin_walls_overlap = 50%
+thin_walls_speed = 80
+threads = 16
+top_fill_pattern = monotonicgapfill
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 6500
+travel_deceleration_use_target = 1
+travel_speed = 350
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_inner_size_compensation = 0
+xy_size_compensation = 0
+
+[print:Ellis_PIF_Standard_15mm3]
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonicgapfill
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 1
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 85%
+bridge_internal_acceleration = 5000
+bridge_overlap = 50%
+bridge_overlap_min = 50%
+bridge_speed = 140
+bridge_speed_internal = 100%
+bridge_type = nozzle
+bridged_infill_margin = 300%
+brim_acceleration = 5000
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_separation = 0
+brim_speed = 50%
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 4000
+default_speed = 100
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+enforce_full_fill_volume = 1
+enforce_retract_first_layer = 0
+ensure_vertical_shell_thickness = 0
+exact_last_layer_height = 0
+external_infill_margin = 4
+external_perimeter_acceleration = 1000
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 100%
+external_perimeter_overlap = 100%
+external_perimeter_speed = 80
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_spacing = 
+extrusion_width = 115%
+fill_angle = 45
+fill_angle_increment = 0
+fill_density = 40%
+fill_pattern = grid
+fill_smooth_distribution = 10%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 125%
+first_layer_flow_ratio = 100%
+first_layer_height = 0.25
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 3
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 200%
+fuzzy_skin_thickness = 150%
+gap_fill_acceleration = 2000
+gap_fill_enabled = 1
+gap_fill_flow_match_perimeter = 0%
+gap_fill_last = 1
+gap_fill_min_area = 50%
+gap_fill_overlap = 100%
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+hole_size_compensation = 0
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = notconnected
+infill_connection_solid = notconnected
+infill_connection_top = notconnected
+infill_dense = 0
+infill_dense_algo = autoenlarged
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 160%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_acceleration = 2000
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_speed = 15
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 20
+min_width_top_surface = 200%
+mmu_segmented_region_max_width = 0
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = 
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+over_bridge_flow_ratio = 100%
+overhangs_acceleration = 2000
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 100%
+overhangs_width = 75%
+overhangs_width_speed = 0
+perimeter_acceleration = 2000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 0
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 150
+perimeters = 4
+post_process = 
+print_custom_variables = wall_thickness_lines = 0
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = Ellis - PIF Standard (15mm3/s)
+print_temperature = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+resolution_internal = 0.1
+seam_angle_cost = 100%
+seam_position = cost
+seam_travel_cost = 0%
+single_extruder_multi_material_priming = 1
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 140%
+solid_infill_overlap = 100%
+solid_infill_speed = 200
+solid_over_perimeters = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_acceleration = 5000
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_acceleration = 5000
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 80%
+thin_perimeters_all = 20%
+thin_walls = 1
+thin_walls_acceleration = 2000
+thin_walls_merge = 1
+thin_walls_min_width = 33%
+thin_walls_overlap = 50%
+thin_walls_speed = 80
+threads = 16
+top_fill_pattern = monotonicgapfill
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_deceleration_use_target = 1
+travel_speed = 350
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_inner_size_compensation = 0
+xy_size_compensation = 0
+
+[filament:D3D PLA+ Cyanblue]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #4BC1DB
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_cooling_zone_pause = 0
+filament_cost = 30.5
+filament_custom_variables = ""
+filament_density = 1.23
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "ABS - KVP"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+support_material_interface_fan_speed = -1
+temperature = 210
+top_fan_speed = -1
+
+[filament:D3D PLA+ Marble]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.97
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #0097B8
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_cooling_zone_pause = 0
+filament_cost = 30.5
+filament_custom_variables = ""
+filament_density = 1.23
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "ABS - KVP"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 235
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+support_material_interface_fan_speed = -1
+temperature = 235
+top_fan_speed = -1
+
+[filament:D3d PETG - Blue]
+bed_temperature = 70
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1.02
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #8FA094
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 80
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 70
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 250
+top_fan_speed = -1
+
+[filament:D3d PETG - Purple]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1.02
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #8FA094
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 80
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = 0.6
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 250
+top_fan_speed = -1
+
+[filament:D3d PETG - Red]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF0002
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 100
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = 0.8
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 250
+top_fan_speed = -1
+
+[filament:D3d PETG - Silver]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #8FA094
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 100
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = 0.8
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 250
+top_fan_speed = -1
+
+[filament:Eryone PETG - Blue]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #2400FF
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 120
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 240
+top_fan_speed = -1
+
+[filament:Eryone PETG - Galaxy Blue]
+bed_temperature = 70
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #331EB0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 70
+first_layer_temperature = 245
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 45
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 235
+top_fan_speed = -1
+
+[filament:Eryone PETG - Galaxy Red]
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 30
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 2
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #571B0D
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.45
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.7
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 245
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 235
+top_fan_speed = -1
+
+[filament:Nuolei TPU (Light Blue)]
+bed_temperature = 50
+bridge_fan_speed = 80
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1.25
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 40
+filament_custom_variables = ""
+filament_density = 1.22
+filament_deretract_speed = 25
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 60
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 0.28
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "Generic FLEX"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = FLEX
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = Generic
+filament_wipe = 0
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 50
+first_layer_temperature = 225
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 90
+max_speed_reduction = 90%
+min_fan_speed = 70
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "M900 K0"
+support_material_interface_fan_speed = -1
+temperature = 225
+top_fan_speed = -1
+
+[filament:Sparta3D ABS @VORON - Sky Blue, Sparkle]
+bed_temperature = 80
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 50
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 3
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3095E4
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 35
+filament_custom_variables = ""
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ";max fan speed changed from 0 to 100"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 250
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 25
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 240
+top_fan_speed = -1
+
+[filament:eSun ABS @VORON - Black]
+bed_temperature = 90
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 50
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 3
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #000000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ";max fan speed changed from 0 to 100"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 245
+top_fan_speed = -1
+
+[filament:eSun ABS @VORON - Green]
+bed_temperature = 90
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 50
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 3
+end_filament_gcode = ""
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #73E350
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 12
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ";max fan speed changed from 0 to 100"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = ""
+support_material_interface_fan_speed = -1
+temperature = 245
+top_fan_speed = -1
+
+[filament:eSun PLA+ Magenta]
+bed_temperature = 40
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.97
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #707070
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_cooling_zone_pause = 0
+filament_cost = 30
+filament_custom_variables = ""
+filament_density = 1.23
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "ABS - KVP"
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = (Unknown)
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 40
+first_layer_temperature = 210
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+support_material_interface_fan_speed = -1
+temperature = 210
+top_fan_speed = -1
+
+[printer:Sovol Sv06]
+bed_custom_model = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/SV06BuildPlate.stl
+bed_custom_texture = /home/bassam/3dprinter/voron01-related/Ellis-SuperSlicer-Profiles/misc/Texture_SV06.svg
+bed_shape = 0x0,223x0,223x223,0x223
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Prusament PLA"
+default_print_profile = 0.15mm QUALITY @MK3
+deretract_speed = 60
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_fan_offset = 0%
+extruder_offset = 0x0
+extruder_temperature_offset = 0
+fan_kickstart = 0
+fan_percentage = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+feature_gcode = 
+gcode_filename_illegal_char = [<>:"/\\\\|?*]
+gcode_flavor = klipper
+gcode_precision_e = 5
+gcode_precision_xyz = 3
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+init_z_rotate = 0
+layer_gcode = 
+lift_min = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_gcode_per_second = 1500
+max_layer_height = 75%
+max_print_height = 255
+milling_diameter = 
+milling_toolchange_end_gcode = 
+milling_toolchange_start_gcode = 
+milling_z_lift = 
+min_layer_height = 0.04
+min_length = 0.035
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = PAUSE
+print_host = 
+printer_custom_variables = 
+printer_model = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+printer_settings_id = Sovol Sv06
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printhost_port = 
+remaining_times = 1
+remaining_times_type = m73
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.3
+retract_length_toolchange = 4
+retract_lift = 0
+retract_lift_above = 0.2
+retract_lift_below = 250
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+seam_gap = 15%
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\r\nPURGE_LINE\n\n;; If you are passing variables to PRINT_START, comment out above line and uncomment the last 3 lines instead. (I already did this)\n;; Guide: https://github.com/AndrewEllis93/Print-Tuning-Guide/blob/main/articles/passing_slicer_variables.md\n;; Make sure the variable names match (for example if you use "EXTRUDER" instead of "HOTEND")\n
+start_gcode_manual = 0
+template_custom_gcode = 
+thumbnails = 32x32,400x300
+thumbnails_color = #00FF00
+thumbnails_custom_color = 1
+thumbnails_end_file = 0
+thumbnails_format = PNG
+thumbnails_with_bed = 1
+time_cost = 0
+time_estimation_compensation = 100%
+time_start_gcode = 20
+time_toolchange = 30
+tool_name = ""
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_advanced = 0
+wipe_advanced_algo = linear
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 120
+wipe_extra_perimeter = 0
+wipe_inside_depth = 50%
+wipe_inside_end = 1
+wipe_inside_start = 0
+wipe_only_crossing = 1
+wipe_speed = 0
+z_offset = 0
+z_step = 0.005
+
+[presets]
+print = Ellis_PIF_Standard_15mm3
+sla_print = 
+sla_material = 
+printer = Sovol Sv06
+filament = eSun PLA+ Magenta
+physical_printer = Sv06