PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated readme.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-18 08:11:42 -04:00
parent 572e768111
commit b8156cf081
1 changed files with 30 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
README.md
View File

@@ -100,9 +100,9 @@ If you have a beeper pin set in your `printer.cfg`, the printer will beep upon:
- Upon `PRINT_END`. - Upon `PRINT_END`.
- `MECHANICAL_GANTRY_CALIBRATION`/`G34`. - `MECHANICAL_GANTRY_CALIBRATION`/`G34`.
##### How do I disable/enable beeping? ##### How do I disable beeping?
Make the following changes according to your needs. Make the following changes according to your needs. All beeping will be disabled *except* during gantry calibration.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| - | - | | - | - |
@@ -126,6 +126,34 @@ Make the following changes according to your needs. Also, search for the word `N
A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps. A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
##### What happens when I put in `M600`/colour change at a certain layer?
1. The printer will beep 3 times (not annoyingly).
2. Printing will stop.
3. The printhead will park itself front center.
4. The hotend will turn off, but the bed will remain hot.
##### What happens when I pause a print?
Same behaviour as `M600`/colour change *except* there won't be any beeping.
##### What happens when filament runs out?
*If* you have a working filament sensor, the same behaviour as `M600`/colour change will occur*except* the beeps will be fairly annoying.
##### How do I resume a print after a colour change or filament runout?
*Do no disable the stepper motors during this process!*
The printhead is now parked front center waiting for you to insert filament. You will:
1. Heat up the hotend to the desired temperature.
- Use your Klipper dashboard.
2. Purge (push) some filament through the nozzle.
- Use your Klipper dashboard, and extrude maybe 50mm (for a colour change you probably want to extrude more).
- OR, you can push some filament by hand *making sure to first disengage the extruder's spring loaded arm*.
3. Hit resume in your Klipper dashboard.
## Useful Resources ## Useful Resources
- [RP2040-Zero ADXL345 Connection Klipper](https://github.com/bassamanator/rp2040-zero-adxl345-klipper) - [RP2040-Zero ADXL345 Connection Klipper](https://github.com/bassamanator/rp2040-zero-adxl345-klipper)