diff --git a/cfgs/misc-macros.cfg b/cfgs/misc-macros.cfg
index b341cc1..6ed5397 100644
--- a/cfgs/misc-macros.cfg
+++ b/cfgs/misc-macros.cfg
@@ -52,27 +52,27 @@ gcode:
         SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
     {% endif %}
 
-[gcode_macro M109]
-rename_existing: M99109
-gcode:
-    #Parameters
-    {% set s = params.S|float %}
+# [gcode_macro M109]
+# rename_existing: M99109
+# gcode:
+#     #Parameters
+#     {% set s = params.S|float %}
     
-    M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
-    {% if s != 0 %}
-        TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
-    {% endif %}
+#     M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
+#     {% if s != 0 %}
+#         TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
+#     {% endif %}
 
-[gcode_macro M190]
-rename_existing: M99190
-gcode:
-    #Parameters
-    {% set s = params.S|float %}
+# [gcode_macro M190]
+# rename_existing: M99190
+# gcode:
+#     #Parameters
+#     {% set s = params.S|float %}
 
-    M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
-    {% if s != 0 %}
-        TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
-    {% endif %}
+#     M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   ; Set bed temp
+#     {% if s != 0 %}
+#         TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}  ; Wait for bed temp (within 1 degree)
+#     {% endif %}
 
 [gcode_macro PURGE_LINE]
 # https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
diff --git a/printer.cfg b/printer.cfg
index 334b567..45ed30a 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -34,7 +34,7 @@ square_corner_velocity: 8.0
 step_pin: PC2
 dir_pin: !PB9
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_x:virtual_endstop
 position_endstop: 0
@@ -56,7 +56,7 @@ diag_pin: PA5
 step_pin: PB8
 dir_pin: PB7
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 40
 endstop_pin: tmc2209_stepper_y:virtual_endstop
 position_endstop: 0
@@ -78,7 +78,7 @@ diag_pin: PA6
 step_pin: PB6
 dir_pin: !PB5
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4
 endstop_pin: probe:z_virtual_endstop
 position_min: -3
@@ -102,7 +102,7 @@ diag_pin: PA7
 step_pin: PB4
 dir_pin: !PB3
 enable_pin: !PC3
-microsteps: 64
+microsteps: 128
 rotation_distance: 4.65 # NOTE Calibrate e-steps and adjust https://www.klipper3d.org/Rotation_Distance.html
 nozzle_diameter: 0.400
 filament_diameter: 1.750
@@ -245,7 +245,7 @@ runout_gcode:
 #*# pid_kd = 928.332
 #*#
 #*# [probe]
-#*# z_offset = 1.665
+#*# z_offset = 1.630
 #*#
 #*# [bed_mesh newbed]
 #*# version = 1
@@ -288,11 +288,11 @@ runout_gcode:
 #*# [bed_mesh default-v1]
 #*# version = 1
 #*# points =
-#*# 	-0.219375, -0.138125, -0.072500, -0.067500, -0.108750
-#*# 	-0.208125, -0.140625, -0.065625, -0.053125, -0.111250
-#*# 	-0.220000, -0.124375, -0.058750, -0.051250, -0.100625
-#*# 	-0.224375, -0.121250, -0.046250, -0.049375, -0.097500
-#*# 	-0.184375, -0.072500, -0.006875, -0.008125, -0.043125
+#*# 	-0.181250, -0.127500, -0.082500, -0.086875, -0.124375
+#*# 	-0.182500, -0.123750, -0.063750, -0.069375, -0.132500
+#*# 	-0.190000, -0.106250, -0.056250, -0.067500, -0.128125
+#*# 	-0.185625, -0.100000, -0.042500, -0.063750, -0.128125
+#*# 	-0.133125, -0.045625, 0.000000, -0.019375, -0.079375
 #*# min_x = 27.0
 #*# max_x = 222.0
 #*# min_y = 5.0
@@ -307,11 +307,11 @@ runout_gcode:
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	-0.181250, -0.127500, -0.082500, -0.086875, -0.124375
-#*# 	-0.182500, -0.123750, -0.063750, -0.069375, -0.132500
-#*# 	-0.190000, -0.106250, -0.056250, -0.067500, -0.128125
-#*# 	-0.185625, -0.100000, -0.042500, -0.063750, -0.128125
-#*# 	-0.133125, -0.045625, 0.000000, -0.019375, -0.079375
+#*# 	  -0.147188, -0.085313, -0.033906, -0.025469, -0.035000
+#*# 	  -0.163594, -0.095313, -0.027344, -0.014219, -0.057813
+#*# 	  -0.187500, -0.087188, -0.030938, -0.019375, -0.063594
+#*# 	  -0.179844, -0.080625, -0.012813, -0.013750, -0.061406
+#*# 	  -0.126094, -0.026250, 0.033594, 0.030781, -0.010000
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2