PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into sv06-plus

Browse Source
This commit is contained in:
Bassam Husain
2023-11-20 03:19:50 -05:00
parent 361f205980 62e2e96e0c
commit afed2f2ecf
1 changed files with 16 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
README.md
View File

@@ -244,15 +244,15 @@ This repository contains many files and folders. Some are _necessary_ for this K
## FAQ ## FAQ
##### How do I import a configuration bundle into SuperSlicer/PrusaSlicer? ### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13). Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).
##### How do I print using SuperSlicer? ### How do I print using SuperSlicer?
Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/14). Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/14).
##### When does beeping occur? ### When does beeping occur?
💡 Beeping will likely not work on the SV06 Plus. I recommend not turning it on. 💡 Beeping will likely not work on the SV06 Plus. I recommend not turning it on.
@@ -261,11 +261,9 @@ The printer will beep upon:
- Filament runout. - Filament runout.
- Filament change/`M600`. - Filament change/`M600`.
- Upon `PRINT_END`. - Upon `PRINT_END`.
- `MECHANICAL_GANTRY_CALIBRATION`/`G34`. - `MECHANICAL_GANTRY_CALIBRATION`/`G34` (beeping will occur even if beeping is disabled, as long as you have a speaker on your board).
##### How do I disable beeping? Adjust behaviour according to your needs.
Make the following changes according to your needs. All beeping will be disabled _except_ during gantry calibration.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| -------- | -------------------------- | | -------- | -------------------------- |
@@ -274,13 +272,11 @@ Make the following changes according to your needs. All beeping will be disabled
| Disable | `0` (default) | | Disable | `0` (default) |
| Enable | `1` | | Enable | `1` |
##### I want to use a filament sensor. How do I set it up? ### I want to use a filament sensor. How do I set it up?
You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor). You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
##### I have a simple filament sensor connected. How do I enable/disable it? Adjust behaviour according to your needs.
Make the following changes according to your needs.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| -------- | ---------------------------------- | | -------- | ---------------------------------- |
@@ -289,28 +285,28 @@ Make the following changes according to your needs.
| Disable | `0` | | Disable | `0` |
| Enable | `1` (default) | | Enable | `1` (default) |
##### My filament runout sensor works, but I just started a print without any filament loaded. What gives? ### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps. A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
##### What happens when I put in `M600`/colour change at a certain layer? ### What happens when I put in `M600`/colour change at a certain layer?
1. The printer will beep 3 times (not annoyingly). 1. The printer will beep 3 times (not annoyingly).
2. Printing will stop. 2. Printing will stop.
3. The printhead will park itself front center. 3. The printhead will park itself front center.
4. The hotend will turn off, but the bed will remain hot. 4. The hotend will turn off, but the bed will remain hot.
##### What happens when I pause a print? ### What happens when I pause a print?
Same behaviour as `M600`/colour change _except_ there won't be any beeping. Same behaviour as `M600`/colour change _except_ there won't be any beeping.
##### What happens when filament runs out? ### What happens when filament runs out?
_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying. _If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
##### How do I resume a print after a colour change or filament runout? ### How do I resume a print after a colour change or filament runout?
⚠️ _Do not disable the stepper motors during this process!_ ⚠️ Do not disable the stepper motors during this process!
The printhead is now parked front center waiting for you to insert filament. You will: The printhead is now parked front center waiting for you to insert filament. You will:
@@ -321,7 +317,7 @@ The printhead is now parked front center waiting for you to insert filament. You
- OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_. - OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
3. Hit resume in your Klipper dashboard. 3. Hit resume in your Klipper dashboard.
##### How do I enable KAMP (Klipper Adaptive Meshing & Purging)? ### How do I enable KAMP (Klipper Adaptive Meshing & Purging)?
Although this repo contains all the code from the KAMP repository, only the `mesh` functionality of KAMP has been configured and tested. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`. Although this repo contains all the code from the KAMP repository, only the `mesh` functionality of KAMP has been configured and tested. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.
@@ -331,7 +327,7 @@ The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-
⚠️ KAMP cannot be used with low-powered devices such as the Raspberry Pi Zero. ⚠️ KAMP cannot be used with low-powered devices such as the Raspberry Pi Zero.
Adjust according to your needs. Adjust behaviour according to your needs.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| -------- | ------------------------ | | -------- | ------------------------ |
@@ -340,7 +336,7 @@ Adjust according to your needs.
| Disable | `0` (default) | | Disable | `0` (default) |
| Enable | `1` | | Enable | `1` |
##### How do I use the `TEST_SPEED` macro? ### How do I use the `TEST_SPEED` macro?
⚠️ This is for advanced users only, with well oiled machines. You can cause serious damage to your printer if you're not careful. ☠️ **You have been warned** ☠️. ⚠️ This is for advanced users only, with well oiled machines. You can cause serious damage to your printer if you're not careful. ☠️ **You have been warned** ☠️.