PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'purge' into personal

Browse Source
This commit is contained in:
Bassam Husain
2023-03-27 17:02:55 -04:00
parent 4528151bc1 d227fcb58f
commit ad78f3f759
1 changed files with 39 additions and 25 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
cfgs/misc-macros.cfg
View File

@@ -52,41 +52,55 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %}
# [gcode_macro M109]
# rename_existing: M99109
# gcode:
# #Parameters
# {% set s = params.S|float %}
[gcode_macro M109]
rename_existing: M99109
gcode:
#Parameters
{% set s = params.S|float %}
# M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
# {% if s != 0 %}
# TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
# {% endif %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
{% endif %}
# [gcode_macro M190]
# rename_existing: M99190
# gcode:
# #Parameters
# {% set s = params.S|float %}
[gcode_macro M190]
rename_existing: M99190
gcode:
#Parameters
{% set s = params.S|float %}
# M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
# {% if s != 0 %}
# TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
# {% endif %}
M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
{% endif %}
[gcode_macro PURGE_LINE]
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G0 Y0 X0 F4000 ; go to tongue of print bed
G1 Z0.4 F500.0 ; move bed to nozzle
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
{% set extrudeAmount = 26.6 %}
{% set movementLength = 100 %}
{% set movementSpeed = 15 * 60 %}
# Set safe speeds
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.9 * maxVelocity * 60)|int %}
G92 E0.0 ; reset extruder
G90 ; Absolute positioning
G0 X0 Y0 F{maxVelocityAdjusted} ; move to purge position
G1 Z0.4 F500.0 ; move to purge height
M83 ; Relative extrusion mode
G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
G1 Y140 E35.0 F1200.0 ; intro line 1
G1 X{movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1
#G1 E-.5 F2100 # Retract
G92 E0.0 ; reset extruder
M82 ; Absolute extrusion mode
G1 Z5.0 ; move nozzle to prevent scratch
[gcode_macro CANCEL_PRINT]
@@ -135,8 +149,8 @@ gcode:
# Set safe speeds
{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set zVelocityAdjusted = (0.85 * zVelocity * 60)|int %}
{% set maxVelocityAdjusted = (0.85 * maxVelocity * 60)|int %}
{% set zVelocityAdjusted = (0.95 * zVelocity * 60)|int %}
{% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}