From ac4e68533ab03ea7bb086f381ee9bea263f55f19 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Wed, 25 Jan 2023 22:43:10 -0500
Subject: [PATCH] Pid tuning.

---
 printer.cfg | 38 +++++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index b8983a6..045cbd4 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -119,12 +119,12 @@ filament_diameter: 1.750
 heater_pin: PA1
 sensor_type: sovol_thermistor
 sensor_pin: PC5
-control: pid
-pid_kd: 86.991
-pid_kp: 21.479
-pid_ki: 1.326
+#control: pid
+#pid_kd: 86.991
+#pid_kp: 21.479
+#pid_ki: 1.326
 min_temp: 0
-max_temp: 300
+max_temp: 270
 # min_extrude_temp: 190 # TODO enable after initial setup
 
 [tmc2209 extruder]
@@ -198,12 +198,13 @@ beta: 4160
 heater_pin: PA2
 sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PC4
-control: pid
-pid_kp: 64.440
-pid_ki: 0.773
-pid_kd: 1343.571
 min_temp: 0
-max_temp: 130
+max_temp: 110
+#control: pid
+#pid_kp: 64.440
+#pid_ki: 0.773
+#pid_kd: 1343.571
+
 
 [fan]
 pin: PA0
@@ -214,4 +215,19 @@ cs_pin: PB12
 sclk_pin: PB13
 sid_pin: PB15
 encoder_pins: ^PB14, ^PB10
-click_pin: ^!PB2
\ No newline at end of file
+click_pin: ^!PB2
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 21.047
+#*# pid_ki = 1.477
+#*# pid_kd = 74.981
+#*#
+#*# [heater_bed]
+#*# control = pid
+#*# pid_kp = 71.224
+#*# pid_ki = 1.341
+#*# pid_kd = 945.503