PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Simplified and made clear instructions on skr-mini-e3-v3 branch.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-02 22:50:23 -04:00
parent dba8b85da6
commit ab339294b9
2 changed files with 27 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
README.md
View File

@@ -21,10 +21,19 @@ This branch is **mostly untested**. Having said that, I'm confident that an adva
Wire cables according to the following diagram: Wire cables according to the following diagram:
<img src="./misc/skr-mini/skr-mini-e3-v3.0-v1678580296384.png" alt='skr-mini-e3-v3.0 installation instructions'/> <img src="./misc/skr-mini/skr-mini-e3-v3.0-v1678580296384.png" alt='skr-mini-e3-v3.0 installation instructions'/>
### Download Firmware Precompiled by BIGTREETECH ### Download Firmware Precompiled by BIGTREETECH
- [firmware-USB.bin](./misc/skr-mini/firmware-USB.bin). Connect the SKR-Mini to the Raspberry Pi via USB connection.
- [firmware-USART2.bin](./misc/skr-mini/firmware-USART2.bin). Use TFT port USART2 to communicate with raspberry pi. Connect the UART-TX of raspberry pi with the USART-RX2 of motherboard and connect the UART-RX of raspberry pi with the USART-TX2 of motherboard directly to communicate normally.
Alternatively, find instructions on how to build the firmware yourself [here](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Klipper#build-firmware-image). 💡 The firmware files are located in `misc/skr-mini`.
💡 Be sure to download the `raw` files. Find out more about this [here](https://stackoverflow.com/questions/4604663/download-single-files-from-github).
Depending on how you will set things up, download *one* of the following firmware files:
1. Download [firmware-USB.bin](./misc/skr-mini/firmware-USB.bin). Connect the SKR-Mini to the Raspberry Pi via USB connection. 💡 This is the option that most users will want.
2. Download [firmware-USART2.bin](./misc/skr-mini/firmware-USART2.bin). Use TFT port USART2 to communicate with raspberry pi. Connect the UART-TX of raspberry pi with the USART-RX2 of motherboard and connect the UART-RX of raspberry pi with the USART-TX2 of motherboard directly to communicate normally.
#### Alternatively, find instructions on how to build the firmware yourself [here](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Klipper#build-firmware-image)
<img src="./misc/skr-mini/menuconfig.png" width="500" alt='ls output'/>
### Flash Firmware ### Flash Firmware
@@ -36,13 +45,25 @@ Important: If the file is not renamed, the bootloader will not be updated proper
5. Power on the SKR-mini-E3-V3.0. 5. Power on the SKR-mini-E3-V3.0.
6. After a few seconds, the SKR-mini-E3-V3.0 should be flashed. 6. After a few seconds, the SKR-mini-E3-V3.0 should be flashed.
7. You can confirm that the flash was successful, by running ls /dev/serial/by-id. If the flash was successful, you'll see something like the following: 7. You can confirm that the flash was successful, by running ls /dev/serial/by-id. If the flash was successful, you'll see something like the following:
<img src="./misc/skr-mini/ls-output.png" alt='ls output'/> <img src="./misc/skr-mini/ls-output.png" width="400" alt='ls output'/>
### Download Klipper Configuration ### Download Klipper Configuration
1. Download [printer-skr-mini-e3-v3.cfg](./printer-skr-mini-e3-v3.cfg) and rename it to `printer.cfg`. This is the *only* `printer.cfg` that you will be using. Anytime there is a reference to `printer.cfg`, you will use this `printer.cfg` that you just saved/renamed. You can choose *either* of the 2 following methods.
2. Follow the instructions found in the [Download Klipper Configuration](https://github.com/bassamanator/Sovol-SV06-firmware#download-klipper-configuration) section and onwards. 💡 *Remember to use the `printer.cfg` that you saved in step 1*.
### Clone the Repository
1. `cd ~/printer_data/config`
2. Empty entire `~/printer_data/config` folder. Unfortunately, for safety reasons I will not post this command here. However, in linux, you can delete files via `rm filename`.
3. `git clone -b skr-mini-e3-v3 --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .`
### Download the ZIP
1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/skr-mini-e3-v3.zip) the `ZIP` file containing the Klipper configuration.
2. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
3. Extract **only** the *contents* of the parent folder into `~/printer_data/config`.
#### Once you've cloned or downloaded the configuration, please follow instructions found in [Initial Steps](https://github.com/bassamanator/Sovol-SV06-firmware#initial-steps).
# Sources # Sources
- https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Klipper#how-to-use-klipper-on-skr-mini-e3-v30 - https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Klipper#how-to-use-klipper-on-skr-mini-e3-v30

1
printer-skr-mini-e3-v3.cfg → printer.cfg
View File

@@ -7,7 +7,6 @@
[include ./cfgs/misc-macros.cfg] [include ./cfgs/misc-macros.cfg]
[include ./cfgs/PARKING.cfg] [include ./cfgs/PARKING.cfg]
[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg] [include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
[include ./cfgs/beeper.cfg]
# NOTE Uncomment the ONE of the following lines if you're using an adxl345 # NOTE Uncomment the ONE of the following lines if you're using an adxl345
# [include ./cfgs/adxl-rp2040.cfg] # [include ./cfgs/adxl-rp2040.cfg]