Merge branch 'master' into sv06-plus

.vscode/settings.json

@@ -7,12 +7,24 @@
 	"spellright.documentTypes": ["markdown", "plaintext"],
 	"cSpell.words": [
 		"ADXL",
+		"cfgs",
+		"Fluidd",
+		"Fluiddpi",
 		"gcode",
+		"githubstar",
 		"hotend",
+		"KIAUH",
 		"Klipper",
 		"Klipperized",
+		"lrwxrwxrwx",
+		"moonraker",
 		"octahedroflake",
 		"PARKBED",
+		"PARKCENTER",
+		"PARKFRONT",
+		"PARKFRONTLOW",
+		"PARKREAR",
+		"Prusa",
 		"runout",
 		"Sovol"
 	]

README.md

@@ -1,6 +1,6 @@
 # 🚨 *One-Stop-Shop* Sovol SV06 Klipper Configuration
 
-This repository contains the Klipper configuration and firmware for the **Sovol SV06 PLUS** 3D printer with completely *stock hardware*.
+This repository contains the Klipper configuration and firmware for the **Sovol SV06 Plus** 3D printer.
 
 For the **Sovol SV06**, please refer to the [master](https://github.com/bassamanator/Sovol-SV06-firmware/tree/master) branch.
 
@@ -45,7 +45,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 - If an error was reported at a step, do no proceed to the next step.
 - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are *unlikely* to be data cables, and it's not possible to tell just by looking.
 - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
-- Klipper *must* be installed on the host Raspberry Pi for everything to work. Easiest is to use a [FluiddPi](https://docs.fluidd.xyz/installation/fluiddpi#download) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. [KIAUH](https://github.com/th33xitus/kiauh) is another excellent option, though it's not as simple as flashing MainsailOS on a microSD card, for example.
+- Klipper *must* be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
 - Robert Redford's performance in *Spy Game (2001)* was superb!
 - It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you.
 - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
@@ -63,6 +63,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 
 - Size: `8GB`. According to Sovol, the largest size that you can use is `16GB`.
 - File system: `FAT32`.
+- Allocation unit size: `4096 bytes`.
 - Must not contain any files *except* the firmware file.
 
 ### Flashing Procedure
@@ -100,7 +101,17 @@ You can choose *either* of the 2 following methods.
 ### Step 1
 
 1. Find what port the `mcu` (SV06 motherboard) is connected to via `ls -l /dev/serial/by-id/`.
+    1. The output will be something along the lines of 
+`lrwxrwxrwx    13 root root  22 Apr 11:10  usb-1a86_USB2.0-Serial-if00-port0 -> ../../ttyUSB0`.
+    2. `usb-1a86_USB2.0-Serial-if00-port0` is the relevant part.
+    3. Therefore, the full path to your `mcu` is `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0`.
 2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
+    Based on this *example*, your `mcu` section will be:
+    ```
+    [mcu]
+    serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+    restart_method: command
+    ```
 
 ### Step 2