diff --git a/README.md b/README.md
index 8f2f83a..4bd03e6 100644
--- a/README.md
+++ b/README.md
@@ -1,16 +1,16 @@
-# 🚨 *One-Stop-Shop* Sovol SV06 Klipper Configuration
+# 🚨 _One-Stop-Shop_ Sovol SV06 Klipper Configuration
 
-This repository contains the Klipper configuration and firmware for the **Sovol SV06** 3D printer with completely *stock hardware*.
+This repository contains the Klipper configuration and firmware for the **Sovol SV06** 3D printer with completely _stock hardware_.
 
 For the **Sovol SV06 Plus**, please refer to the [sv06-plus](https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus) branch.
 
-If you wanted to use the One-Stop-Shop Klipper Configuration for a *different printer*, please switch to the [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer) branch.
+If you wanted to use the One-Stop-Shop Klipper Configuration for a _different printer_, please switch to the [any-printer](https://github.com/bassamanator/Sovol-SV06-firmware/tree/any-printer) branch.
 
 I am creating these files for my personal use and cannot be held responsible for what it might do to your printer. Use at your own risk.
 
 # Highlights
 
-- 💥 This Klipper configuration is an *endpoint*, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
+- 💥 This Klipper configuration is an _endpoint_, meaning that it contains **everything** that you could possibly need in order to have an excellent Klipper experience! 💥
 - `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> Filament runout sensor usage implemented. <img src="./images/party_blob.gif" width="20" alt=''/> 
 - Minimum configuration settings for Mainsail/Fluiddpi to work.
 - SuperSlicer config bundle that contains the printer configuration, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)). Find the differences between the different print setting profiles [here](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles/tree/master/SuperSlicer). But basically, the 45 degree profile places the seam at the back.
@@ -36,13 +36,13 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 
 ## Before You Begin
 
-- Read this documentation *fully!*
-- Make sure your printer is in good physical condition, because print and travel speeds will be *a lot faster* than they were before. Consider yourself warned.
+- Read this documentation _fully!_
+- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned.
 - Follow the steps in order.
 - If an error was reported at a step, do no proceed to the next step.
-- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are *unlikely* to be data cables, and it's not possible to tell just by looking.
+- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
 - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
-- Klipper *must* be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
+- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
 - Robert Redford's performance in *Spy Game (2001)* was superb!
 - It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you.
 - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
@@ -50,7 +50,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 
 ## Flash Firmware
 
-💡 *If you have already flashed klipper onto your motherboard in the past, you can skip this step.*
+💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._
 
 💡 For the sake of simplicity, I will refer to the klipper firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
 
@@ -76,24 +76,24 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 
 You may find this [video](https://youtu.be/p6l253OJa34) useful.
 
-⚠️ **Caveat**: Flashing will only work if current firmware filename is *different from previous flashing procedure*. The `.bin` is also important.
+⚠️ **Caveat**: Flashing will only work if current firmware filename is _different from previous flashing procedure_. The `.bin` is also important.
 
 ## Download Klipper Configuration
 
-You can choose *either* of the 2 following methods.
+You can choose _either_ of the 2 following methods.
 
 ### Method 1: Clone the Repository
 
 1. `cd ~/printer_data/config`
 2. Empty entire `~/printer_data/config` folder. Unfortunately, for safety reasons I will not post this command here. However, in linux, you can delete files via `rm filename`.
-3. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .`
+3. `git clone -b master --single-branch https://github.com/bassamanator/Sovol-SV06-firmware.git .` 💡 Don't miss the period!
 
 ### Method 2: Download the ZIP
 
 1. [Download](https://github.com/bassamanator/Sovol-SV06-firmware/archive/refs/heads/master.zip) the `ZIP` file containing the Klipper configuration.
 2. See `Step 2` in `Method 1`.
 3. The parent folder in the `ZIP` is `Sovol-SV06-firmware-master`. This is relevant in the next step.
-4. Extract **only** the *contents* of the parent folder into `~/printer_data/config`.
+4. Extract **only** the _contents_ of the parent folder into `~/printer_data/config`.
 
 ## Initial Steps
 
@@ -174,9 +174,9 @@ PURGE_LINE
 
 ## Directory Structure
 
-This repository contains many files and folders. Some are *necessary* for this Klipper configuration to work, others are not.
+This repository contains many files and folders. Some are _necessary_ for this Klipper configuration to work, others are not.
 - **Necessary** items are marked with a ✅.
-- Items that can *optionally* be deleted are marked with a ❌.
+- Items that can _optionally_ be deleted are marked with a ❌.
 
 ```
 ├── cfgs ✅
@@ -272,11 +272,11 @@ Same behaviour as `M600`/colour change *except* there won't be any beeping.
 
 ##### What happens when filament runs out?
 
-*If* you have a working filament sensor, the same behaviour as `M600`/colour change will occur *except* the beeps will be fairly annoying.
+_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
 
 ##### How do I resume a print after a colour change or filament runout?
 
-*Do no disable the stepper motors during this process!*
+⚠️ _Do not disable the stepper motors during this process!_
 
 The printhead is now parked front center waiting for you to insert filament. You will:
 
@@ -284,7 +284,7 @@ The printhead is now parked front center waiting for you to insert filament. You
     - Use your Klipper dashboard.
 2. Purge (push) some filament through the nozzle.
     - Use your Klipper dashboard, and extrude maybe 50mm (for a colour change you probably want to extrude more).
-    - OR, you can push some filament by hand *making sure to first disengage the extruder's spring loaded arm*.
+    - OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
 3. Hit resume in your Klipper dashboard.
 
 ## Useful Resources