diff --git a/misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini b/misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini
index 567f20f..1fa1569 100644
--- a/misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini
+++ b/misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 18:05:53 UTC
+# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 19:07:58 UTC
 
 [print:0.20mm QUALITY SV06 Ellis]
 avoid_crossing_curled_overhangs = 0
@@ -391,7 +391,7 @@ fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.5
-first_layer_height = 0.25
+first_layer_height = 0.26
 first_layer_speed = 30
 first_layer_speed_over_raft = 30
 fuzzy_skin = none
@@ -564,7 +564,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.46
 fill_angle = 45
 fill_density = 10%
-fill_pattern = monotonic
+fill_pattern = rectilinear
 first_layer_acceleration = 2000
 first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.5
@@ -741,7 +741,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.46
 fill_angle = 45
 fill_density = 10%
-fill_pattern = monotonic
+fill_pattern = rectilinear
 first_layer_acceleration = 2000
 first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.5
@@ -3221,7 +3221,7 @@ z_offset = 0
 
 [physical_printer:Local SV06]
 host_type = octoprint
-preset_name = Sovol SV06
+preset_name = 
 preset_names = "Sovol SV06"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -3235,7 +3235,7 @@ printhost_user =
 
 [physical_printer:Local SV06 Plus]
 host_type = octoprint
-preset_name = Sovol SV06 Plus
+preset_name = 
 preset_names = "Sovol SV06 Plus"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -3249,7 +3249,7 @@ printhost_user =
 
 [physical_printer:Local SV07]
 host_type = octoprint
-preset_name = Sovol SV07
+preset_name = 
 preset_names = "Sovol SV07"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -3263,7 +3263,7 @@ printhost_user =
 
 [physical_printer:Local SV07 Plus]
 host_type = octoprint
-preset_name = Sovol SV07 Plus
+preset_name = 
 preset_names = "Sovol SV07 Plus"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -3276,7 +3276,7 @@ printhost_ssl_ignore_revoke = 0
 printhost_user = 
 
 [presets]
-print = _Ellis_PIF_Standard_15mm3_CoreXY-Speeds
+print = Ellis_PIF_Standard_15mm3
 sla_print = 
 sla_material = 
 printer = Sovol SV06