PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into skr-mini-e3-v3

Browse Source
This commit is contained in:
Bassam Husain
2023-12-01 15:40:57 -05:00
parent a399efb3b5 5aafe60b55
commit 9ad3f153e4
1 changed files with 183 additions and 183 deletions
Download Patch File Download Diff File Expand all files Collapse all files

366
misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini
View File

@@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 19:07:58 UTC
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 20:34:38 UTC
[print:0.20mm QUALITY SV06 Ellis]
avoid_crossing_curled_overhangs = 0
@@ -708,183 +708,6 @@ wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_Decorative_Standard_24mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 5000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 4000
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 1000
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.46
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.26
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 7000
infill_anchor = 600%
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.46
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 24
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_extrusion_width = 0.46
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 3
post_process =
print_settings_id = Ellis - Decorative Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 5000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 10000
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_PIF_Standard_15mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
@@ -1062,7 +885,184 @@ wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_PIF_Standard_24mm3_CoreXY-Speeds]
[print:__Ellis_Decorative_Standard_24mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 5000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 4000
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 1000
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.46
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.26
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 7000
infill_anchor = 600%
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.46
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 24
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_extrusion_width = 0.46
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 3
post_process =
print_settings_id = Ellis - Decorative Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 5000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 10000
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:__Ellis_PIF_Standard_24mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
@@ -3221,7 +3221,7 @@ z_offset = 0
[physical_printer:Local SV06]
host_type = octoprint
preset_name =
preset_name = Sovol SV06
preset_names = "Sovol SV06"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -3235,7 +3235,7 @@ printhost_user =
[physical_printer:Local SV06 Plus]
host_type = octoprint
preset_name =
preset_name = Sovol SV06 Plus
preset_names = "Sovol SV06 Plus"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -3249,7 +3249,7 @@ printhost_user =
[physical_printer:Local SV07]
host_type = octoprint
preset_name =
preset_name = Sovol SV07
preset_names = "Sovol SV07"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -3263,7 +3263,7 @@ printhost_user =
[physical_printer:Local SV07 Plus]
host_type = octoprint
preset_name =
preset_name = Sovol SV07 Plus
preset_names = "Sovol SV07 Plus"
print_host = http://10.0.0.51
printer_technology = FFF