PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into sv06-plus

Browse Source
This commit is contained in:
Bassam Husain
2023-07-01 02:31:22 -04:00
parent 5f59d5bacb 8a8229f6e8
commit 8c1b5093e7
2 changed files with 11 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@@ -1,4 +1,4 @@
# 🚨 _One-Stop-Shop_ Sovol SV06 Klipper Configuration
# 🚨 _One-Stop-Shop_ Klipper Configuration
This branch contains the Klipper configuration and firmware for the **Sovol SV06 Plus** 3D printer.
@@ -163,10 +163,10 @@ You will be pasting/typing these commands into the Mainsail/Fluidd console.
2. Do a mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. ~~You will hear a succession of beeps.~~
1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary.
3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at.
1. `PID_TEST_BED`
1. `PID_TEST_BED TEMP=70`
2. `SAVE_CONFIG` (once completed)
4. PID tune the extruder while part cooling fan runs at 25%.
1. `PID_TEST_HOTEND`
1. `PID_TEST_HOTEND TEMP=245`
2. `SAVE_CONFIG` (once completed)
5. Adjust `z_offset`. Make sure your nozzle if very clean. Do the [Paper test](https://www.klipper3d.org/Bed_Level.html?h=probe_calibrate#the-paper-test).
1. `DO_PROBE_CALIBRATE`