PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjusted calibration.cfg to accept target temp.

Browse Source
This commit is contained in:
Bassam Husain
2023-07-01 02:25:55 -04:00
parent bb90be25cc
commit 8a8229f6e8
2 changed files with 10 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -160,10 +160,10 @@ You will be pasting/typing these commands into the Mainsail/Fluidd console.
2. Do a mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. You will hear a succession of beeps.
1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary.
3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at.
1. `PID_TEST_BED`
1. `PID_TEST_BED TEMP=70`
2. `SAVE_CONFIG` (once completed)
4. PID tune the extruder while part cooling fan runs at 25%.
1. `PID_TEST_HOTEND`
1. `PID_TEST_HOTEND TEMP=245`
2. `SAVE_CONFIG` (once completed)
5. Adjust `z_offset`. Make sure your nozzle if very clean. Do the [Paper test](https://www.klipper3d.org/Bed_Level.html?h=probe_calibrate#the-paper-test).
1. `DO_PROBE_CALIBRATE`