PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust MECHANICAL_GANTRY_CALIBRATION.cfg: change to CONDITIONAL_BEEP.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-22 19:05:26 -05:00
parent 4b42fcccd6
commit 89183cad94
2 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -256,7 +256,7 @@ The printer will beep upon:
- Filament runout. - Filament runout.
- Filament change/`M600`. - Filament change/`M600`.
- Upon `PRINT_END`. - Upon `PRINT_END`.
- `MECHANICAL_GANTRY_CALIBRATION`/`G34` (beeping will occur even if beeping is disabled, as long as you have a speaker on your board). - `MECHANICAL_GANTRY_CALIBRATION`/`G34`.
Adjust behaviour according to your needs. Adjust behaviour according to your needs.

6
cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg
View File

@@ -72,16 +72,16 @@ gcode:
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current} ; drop current SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current} ; drop current
{% endif %} {% endif %}
BEEP I=1 CONDITIONAL_BEEP I=1
G4 P200 ; Probably not necessary, it is here just for sure G4 P200 ; Probably not necessary, it is here just for sure
SET_KINEMATIC_POSITION Z={z_max - 25} ; Trick printer into beleiving the gantry is 25mm lower than it is ; CHANGED SET_KINEMATIC_POSITION Z={z_max - 25} ; Trick printer into beleiving the gantry is 25mm lower than it is ; CHANGED
G1 Z{z_max} F{6 * 60} ; based on above figures, there will be 20mm worth of grinding ; CHANGED G1 Z{z_max} F{6 * 60} ; based on above figures, there will be 20mm worth of grinding ; CHANGED
BEEP I=2 CONDITIONAL_BEEP I=2
G4 P10000 ; wait 10 seconds G4 P10000 ; wait 10 seconds
G1 Z{z_max -6} F{6 * 60} ; move 4mm down G1 Z{z_max -6} F{6 * 60} ; move 4mm down
BEEP I=3 CONDITIONAL_BEEP I=3
G4 P200 ; same as the first one G4 P200 ; same as the first one
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold} SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}