PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust kamp settings: include line_purge; adjust printer.cfg accordingly; adjust readme.md, slicer and kamp sections.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-23 04:36:15 -05:00
parent 189a612e33
commit 8347290f9f
3 changed files with 15 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@@ -200,10 +200,15 @@ But first, adjust your slicer.
You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`.
### Line Purge
If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line, add one of the following:
- `PURGE_LINE`; prints a standard purge line.
- `LINE_PURGE`; prints KAMP's purge line. ⚠️ Do not attempt to use without reading [this section](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging).
```yaml
# 🗒️ This is just an example
# 🗒️ This is just an example Start G-Code
PRINT_START ...
PURGE_LINE
```
@@ -314,13 +319,15 @@ The printhead is now parked front center waiting for you to insert filament. You
### How do I enable KAMP (Klipper Adaptive Meshing & Purging)?
Although this repo contains all the code from the KAMP repository, only the `mesh` functionality of KAMP has been configured and tested. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.
⚠️ No KAMP functionality can be used on low-powered devices such as the Raspberry Pi Zero.
The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-objects#enable-the-label-objects-setting-in-your-slicer) in your slicer must be enabled for KAMP to work.
⚠️ If KAMP is disabled, and there is no `default` mesh, `PRINT_START` will crash.
⚠️ If KAMP is disabled, and you don't have a `default` mesh stored in your `printer.cfg`, `PRINT_START` will crash.
🗒️ The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-objects#enable-the-label-objects-setting-in-your-slicer) in your slicer must be enabled for KAMP to work.
⚠️ KAMP cannot be used with low-powered devices such as the Raspberry Pi Zero.
🗒️ `LINE_PURGE` is useable (on appropriate devices) even if KAMP is disabled.
This repo contains all the code from the KAMP repository, however, only the `adaptive meshing` and `LINE_PURGE` functionality of KAMP has been configured and tested for use. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.
Adjust behaviour according to your needs.