PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

KAMP should be ready.

Browse Source
This commit is contained in:
Bassam Husain
2023-07-06 13:36:59 -04:00
parent aa935b6d57
commit 82d25743fc
2 changed files with 14 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
cfgs/CALIBRATION.cfg
View File

@@ -46,4 +46,4 @@ gcode:
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
G28
BED_MESH_CALIBRATE
_BED_MESH_CALIBRATE

23
cfgs/misc-macros.cfg
View File

@@ -29,13 +29,10 @@ gcode:
variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
variable_kamp_enable: 1 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
variable_pre_purge_prime_length: 1.40
gcode:
# DELETEME This section is unnecessary
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=bed_temp_over VALUE={ variable_bed_temp_over }
# Don't delete this section
[gcode_macro CONDITIONAL_BEEP]
gcode:
@@ -122,6 +119,7 @@ gcode:
[gcode_macro PRINT_START]
gcode:
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# Parameters
{% set bedtemp = params.BED|int %}
{% set hotendtemp = params.HOTEND|int %}
@@ -132,6 +130,7 @@ gcode:
{% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %}
{% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
{% if printer.configfile.settings.safe_z_home %}
{% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
@@ -149,9 +148,6 @@ gcode:
{% endif %}
{% endif %}
BED_MESH_PROFILE LOAD=default ; NOTE if not using a mesh, comment out this line
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G90 ; absolute positioning
M140 S{bedtempAlmost} ; set & don't wait for bed temp
M104 S{hotendtempStepOne} ; set & don't wait for hotend temp
@@ -165,8 +161,15 @@ gcode:
M190 S{bedtemp} ; set & wait for bed temp
M140 S{bedtempSlicer} ; set & don't wait for bed temp ; set temp to sliced setting regardless
M104 S{hotendtemp} ; set & don't wait for hotend temp
G28 Z ; final z homing
{% if kampEnabled == 0 %}
BED_MESH_PROFILE LOAD=default ; NOTE if not using a mesh, comment out this line
M104 S{hotendtemp} ; set & don't wait for hotend temp
G28 Z ; final z homing
{% else %}
G28 Z ; final z homing
BED_MESH_CALIBRATE ; KAMP mesh
M104 S{hotendtemp} ; set & don't wait for hotend temp
{% endif %}
G1 X0 Y0 F{maxVelocityAdjusted}
M109 S{hotendtemp} ; set & wait for hotend temp