PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjusted readme structure.

Browse Source
This commit is contained in:
Bassam Husain
2023-06-22 19:29:36 -04:00
parent d405db4922
commit 82c02bbdbf
1 changed files with 7 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@@ -16,10 +16,10 @@ I am creating these files for my personal use and cannot be held responsible for
- [Features](#features) - [Features](#features)
- [Stay Up-to-Date](#stay-up-to-date) - [Stay Up-to-Date](#stay-up-to-date)
- [Preface](#preface) - [Preface](#preface)
- [Installation Steps](#installation-steps) - [Before You Begin](#before-you-begin)
- [Before You Begin](#before-you-begin) - [Klipper Installation](#klipper-installation)
- [Flash Firmware](#flash-firmware) - [Flash Firmware](#flash-firmware)
- [Download Klipper Configuration](#download-klipper-configuration) - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
- [Initial Steps](#initial-steps) - [Initial Steps](#initial-steps)
1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path) 1. [Adjust Configuration with MCU Path](#adjust-configuration-with-mcu-path)
2. [Configure Your Printer](#configure-your-printer) 2. [Configure Your Printer](#configure-your-printer)
@@ -55,9 +55,7 @@ Watch for releases and updates.
Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience. Although I've made switching over to Klipper as easy as is possible, it can still be a challenge for some, especially considering that most of you have likely never used GNU+Linux. Save yourself the frustration, and fully read all documentation found on this page. Also note that Klipper is not a _must_, and is not for everyone. You can stick with Marlin, and have a fine 3D printing experience.
## Installation Steps ## Before You Begin
### Before You Begin
- Read this documentation _fully!_ - Read this documentation _fully!_
- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned. - Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Consider yourself warned.
@@ -71,6 +69,8 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section. - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
- I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration. - I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration.
## Klipper Installation
### Flash Firmware ### Flash Firmware
💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._ 💡 _If you have already flashed klipper onto your motherboard in the past, you can skip this step._
@@ -100,7 +100,7 @@ Please note:
You may find this [video](https://youtu.be/p6l253OJa34) useful. You may find this [video](https://youtu.be/p6l253OJa34) useful.
### Download Klipper Configuration ### Download OSS Klipper Configuration
You can choose _either_ of the 2 following methods. You can choose _either_ of the 2 following methods.