diff --git a/README.md b/README.md
index 84a277e..0dcafb4 100644
--- a/README.md
+++ b/README.md
@@ -67,7 +67,7 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
 - Follow the steps in order.
 - If an error was reported at a step, do no proceed to the next step.
 - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
-- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#put-tape-on-the-5v-pin) the USB cable's 5V pin.
+- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#disable-usb-cable-5v-pin) the USB cable's 5V pin.
 - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
 - Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
 - Robert Redford's performance in _Spy Game (2001)_ was superb!