Merge branch 'master' into skr-mini-e3-v3

misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-23 at 18:53:35 UTC
+# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 18:05:53 UTC
 
 [print:0.20mm QUALITY SV06 Ellis]
 avoid_crossing_curled_overhangs = 0
@@ -708,6 +708,183 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:_Ellis_Decorative_Standard_24mm3_CoreXY-Speeds]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotoniclines
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 0.85
+bridge_speed = 140
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 4000
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 1000
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 80
+external_perimeters_first = 0
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.46
+fill_angle = 45
+fill_density = 10%
+fill_pattern = monotonic
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.26
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 400%
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.46
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 24
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+overhang_speed_0 = 75%
+overhang_speed_1 = 80%
+overhang_speed_2 = 90%
+overhang_speed_3 = 100%
+overhangs = 1
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.46
+perimeter_generator = arachne
+perimeter_speed = 150
+perimeters = 3
+post_process = 
+print_settings_id = Ellis - Decorative Standard (15mm³)
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 30
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.56
+solid_infill_speed = 200
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 30%
+thick_bridges = 0
+thin_walls = 1
+threads = 16
+top_fill_pattern = monotoniclines
+top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_speed = 300
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:_Ellis_PIF_Standard_15mm3_CoreXY-Speeds]
 avoid_crossing_curled_overhangs = 0
 avoid_crossing_perimeters = 0
@@ -885,6 +1062,183 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:_Ellis_PIF_Standard_24mm3_CoreXY-Speeds]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotoniclines
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 1
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 0.85
+bridge_speed = 140
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 4000
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 1000
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 80
+external_perimeters_first = 0
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.46
+fill_angle = 45
+fill_density = 40%
+fill_pattern = grid
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.26
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 400%
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.64
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 24
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 20
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+overhang_speed_0 = 75%
+overhang_speed_1 = 80%
+overhang_speed_2 = 90%
+overhang_speed_3 = 100%
+overhangs = 1
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_generator = arachne
+perimeter_speed = 150
+perimeters = 4
+post_process = 
+print_settings_id = Ellis - PIF Standard (15mm³)
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 30
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.56
+solid_infill_speed = 200
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 30%
+thick_bridges = 0
+thin_walls = 1
+threads = 16
+top_fill_pattern = monotoniclines
+top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_speed = 300
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [filament:Basic PETG]
 bed_temperature = 70
 bridge_fan_speed = 100
@@ -2543,8 +2897,8 @@ temperature = 210
 
 [printer:Sovol SV06]
 autoemit_temperature_commands = 1
-bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
+bed_custom_model = 
-bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
+bed_custom_texture = 
 bed_shape = 0x0,223x0,223x223,0x223
 before_layer_gcode = 
 between_objects_gcode = 
@@ -2624,8 +2978,8 @@ z_offset = 0
 
 [printer:Sovol SV06 Plus]
 autoemit_temperature_commands = 1
-bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
+bed_custom_model = 
-bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
+bed_custom_texture = 
 bed_shape = 0x0,300x0,300x300,0x300
 before_layer_gcode = 
 between_objects_gcode = 
@@ -2703,9 +3057,171 @@ variable_layer_height = 1
 wipe = 0
 z_offset = 0
 
+[printer:Sovol SV07]
+autoemit_temperature_commands = 1
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,220x0,220x220,0x220
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Prusament PLA"
+default_print_profile = 0.15mm QUALITY @MK3
+deretract_speed = 40
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 250
+min_layer_height = 0.04
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = PAUSE
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = Sovol Sv06
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0.2
+retract_lift_below = 250
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\n; PURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
+template_custom_gcode = 
+thumbnails = 32x32,400x300
+thumbnails_format = PNG
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+[printer:Sovol SV07 Plus]
+autoemit_temperature_commands = 1
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Prusament PLA"
+default_print_profile = 0.15mm QUALITY @MK3
+deretract_speed = 40
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 350
+min_layer_height = 0.04
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = PAUSE
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = Sovol Sv06
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0.2
+retract_lift_below = 250
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\n; PURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
+template_custom_gcode = 
+thumbnails = 32x32,400x300
+thumbnails_format = PNG
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
 [physical_printer:Local SV06]
 host_type = octoprint
-preset_name = 
+preset_name = Sovol SV06
 preset_names = "Sovol SV06"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -2719,7 +3235,7 @@ printhost_user =
 
 [physical_printer:Local SV06 Plus]
 host_type = octoprint
-preset_name = 
+preset_name = Sovol SV06 Plus
 preset_names = "Sovol SV06 Plus"
 print_host = http://10.0.0.51
 printer_technology = FFF
@@ -2731,8 +3247,36 @@ printhost_port =
 printhost_ssl_ignore_revoke = 0
 printhost_user = 
 
+[physical_printer:Local SV07]
+host_type = octoprint
+preset_name = Sovol SV07
+preset_names = "Sovol SV07"
+print_host = http://10.0.0.51
+printer_technology = FFF
+printhost_apikey = 
+printhost_authorization_type = key
+printhost_cafile = 
+printhost_password = 
+printhost_port = 
+printhost_ssl_ignore_revoke = 0
+printhost_user = 
+
+[physical_printer:Local SV07 Plus]
+host_type = octoprint
+preset_name = Sovol SV07 Plus
+preset_names = "Sovol SV07 Plus"
+print_host = http://10.0.0.51
+printer_technology = FFF
+printhost_apikey = 
+printhost_authorization_type = key
+printhost_cafile = 
+printhost_password = 
+printhost_port = 
+printhost_ssl_ignore_revoke = 0
+printhost_user = 
+
 [presets]
-print = Ellis_Decorative_Standard_15mm3
+print = _Ellis_PIF_Standard_15mm3_CoreXY-Speeds
 sla_print = 
 sla_material = 
 printer = Sovol SV06