Adjust OS bundles.

.vscode/settings.json

@@ -32,9 +32,11 @@
 		"pico",
 		"Printables",
 		"Prusa",
+		"reformats",
 		"runout",
 		"scriptsize",
 		"Sovol",
+		"superslicer",
 		"textcolor",
 		"textit",
 		"texttt"

README.md

@@ -50,6 +50,7 @@ ${\small{\textit{** Maintained by ElPainis}}}$
 - Pre-configured configuration bundles based on the [Ellis SuperSlicer Print Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles):
   - SuperSlicer
   - PrusaSlicer
+  - 🚀 OrcaSlicer 🚀
   - Printer profiles: `SV06/Plus`; `SV07/Plus`
 - Bed model and texture to use in SuperSlicer/PrusaSlicer.
 - Macros:

misc/orcaslicer-bundles/how-to-generate/README.md

@@ -0,0 +1,15 @@
+## Converting PrusaSlicer/SuperSlicer config bundles to OrcaSlicer
+
+OrcaSlicer configs can be converted from PrusaSlicer using [SuperSlicer_to_Orca_scripts](https://github.com/apparle/SuperSlicer_to_Orca_scripts). It is a fork of theophile's script with some enhancements which haven't been merged yet ([theophile/SuperSlicer_to_Orca_scripts#43](https://github.com/theophile/SuperSlicer_to_Orca_scripts/pull/43)). It does require a few perl modules which can be installed using `cpanminus` (or your favorite perl module manager).
+
+Most of the script is automated, with the exception of `printer_model` field which must be manually specified with a `json`. This attribute is used by OrcaSlicer to load the appropriate build plate images & STLs.
+
+```
+perl SuperSlicer_to_Orca_scripts/superslicer_to_orca.pl --input PrusaSlicer_config_bundle-2.9.2.ini --nozzle-size 0.4 --compatible_printers_condition KEEP --skip-link-system-printer --printer-models-json printer_models_conversion_mapping.json --output-config-bundle OrcaSlicer_config_bundle-2.9.2-DEV.zip
+```
+
+## How to use OrcaSlicer bundle:
+
+This config bundle can be imported into OrcaSlicer : `File > Import > Import configs...`
+
+Note, OrcaSlicer reformats the `json` and adds some default attributes, so the imported files cannot be directly compared with the contents of the zipped bundle. But you can use json comparison tools like [https://www.jsondiff.com/](https://www.jsondiff.com/) to analyze the differences if needed.

misc/orcaslicer-bundles/how-to-generate/printer_models_conversion_mapping.json

@@ -0,0 +1,12 @@
+{
+	"SV06 0.4 nozzle": "Sovol SV06",
+	"SV06 0.6 nozzle": "Sovol SV06",
+	"SV06 ACE 0.4 nozzle": "Sovol SV06 ACE",
+	"SV06 ACE 0.6 nozzle": "Sovol SV06 ACE",
+	"SV06 Plus 0.4 nozzle": "Sovol SV06 Plus",
+	"SV06 Plus 0.6 nozzle": "Sovol SV06 Plus",
+	"SV07 0.4 nozzle": "Sovol SV07",
+	"SV07 0.6 nozzle": "Sovol SV07",
+	"SV07 Plus 0.4 nozzle": "Sovol SV07 Plus",
+	"SV07 Plus 0.6 nozzle": "Sovol SV07 Plus"
+}