PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Print_start adjusted: prints will start as long as current bed temp is not higher than 10C compared to sliced bed temp.

Browse Source
This commit is contained in:
Bassam Husain
2023-05-10 01:43:37 -04:00
parent f0602b5cb2
commit 7112c53ad8
1 changed files with 7 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
cfgs/misc-macros.cfg
View File

@@ -124,10 +124,12 @@ gcode:
gcode:
# Parameters
{% set bedtemp = params.BED|int %}
{% set bedtempSlicer = bedtemp %}
{% set hotendtemp = params.HOTEND|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %}
# Other variables
{% set bedtempSlicer = bedtemp %}
{% set bedtempRange = 10 %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %}
@@ -140,9 +142,12 @@ gcode:
{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
# If bed-temp-almost is higher than bed-temp by a maximum of 10C
{% if bedtempAlmost > bedtemp %}
{% if (bedtempAlmost - bedtempRange) <= bedtemp %}
{% set bedtemp = bedtempAlmost %}
{% endif %}
{% endif %}
BED_MESH_PROFILE LOAD=default ; NOTE if not using a mesh, comment out this line
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1