PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Cleanup in readme.

Browse Source
This commit is contained in:
Bassam Husain
2023-06-09 18:07:42 -04:00
parent 9c9eb1b088
commit 6399c70309
1 changed files with 14 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
README.md
View File

@@ -106,6 +106,7 @@ You can choose *either* of the 2 following methods.
3. Therefore, the full path to your `mcu` is either `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0` or `/dev/serial/by-path/usb-1a86_USB2.0-Serial-if00-port0`, depending on the command you used to find the `mcu`. 3. Therefore, the full path to your `mcu` is either `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0` or `/dev/serial/by-path/usb-1a86_USB2.0-Serial-if00-port0`, depending on the command you used to find the `mcu`.
2. Adjust the `[mcu]` section in `printer.cfg` accordingly. 2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
This is just an *example* `mcu` section: This is just an *example* `mcu` section:
``` ```
[mcu] [mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
@@ -163,6 +164,7 @@ But first, adjust your slicer.
You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code). You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. Here's an example: If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. Here's an example:
``` ```
PRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature] PRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
PURGE_LINE PURGE_LINE
@@ -230,12 +232,12 @@ The printer will beep upon:
Make the following changes according to your needs. All beeping will be disabled *except* during gantry calibration. Make the following changes according to your needs. All beeping will be disabled *except* during gantry calibration.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| - | - | | --------------- | -------------------------- |
| Section | `[gcode_macro _globals]` | | Section | `[gcode_macro _globals]` |
| Variable | `variable_beeping_enabled` | | Variable | `variable_beeping_enabled` |
| Disable beeping | `0` | | Disable beeping | `0` |
| Enable beeping | `1` | | Enable beeping | `1` |
##### I want to use a filament sensor. How do I set it up? ##### I want to use a filament sensor. How do I set it up?
@@ -244,12 +246,12 @@ Make the following changes according to your needs. All beeping will be disabled
Make the following changes according to your needs. Make the following changes according to your needs.
| File | `cfgs/misc-macros.cfg` | | File | `cfgs/misc-macros.cfg` |
| - | - | | -------------- | ---------------------------------- |
| Section | `[gcode_macro _globals]` | | Section | `[gcode_macro _globals]` |
| Variable | `variable_filament_sensor_enabled` | | Variable | `variable_filament_sensor_enabled` |
| Disable sensor | `0` | | Disable sensor | `0` |
| Enable sensor | `1` | | Enable sensor | `1` |
##### My filament runout sensor works, but I just started a print without any filament loaded. What gives? ##### My filament runout sensor works, but I just started a print without any filament loaded. What gives?