PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust readme: FAQs.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-20 03:14:27 -05:00
parent ed1a658419
commit 62e2e96e0c
1 changed files with 16 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
README.md
View File

@@ -241,26 +241,24 @@ This repository contains many files and folders. Some are _necessary_ for this K
## FAQ
##### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
### How do I import a configuration bundle into SuperSlicer/PrusaSlicer?
Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/13).
##### How do I print using SuperSlicer?
### How do I print using SuperSlicer?
Please see [this discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions/14).
##### When does beeping occur?
### When does beeping occur?
The printer will beep upon:
- Filament runout.
- Filament change/`M600`.
- Upon `PRINT_END`.
- `MECHANICAL_GANTRY_CALIBRATION`/`G34`.
- `MECHANICAL_GANTRY_CALIBRATION`/`G34` (beeping will occur even if beeping is disabled, as long as you have a speaker on your board).
##### How do I disable beeping?
Make the following changes according to your needs. All beeping will be disabled _except_ during gantry calibration.
Adjust behaviour according to your needs.
| File | `cfgs/misc-macros.cfg` |
| -------- | -------------------------- |
@@ -269,13 +267,11 @@ Make the following changes according to your needs. All beeping will be disabled
| Disable | `0` |
| Enable | `1` (default) |
##### I want to use a filament sensor. How do I set it up?
### I want to use a filament sensor. How do I set it up?
You can find information about the physical setup [here](https://github.com/bassamanator/everything-sovol-sv06#filament-sensor).
##### I have a simple filament sensor connected. How do I enable/disable it?
Make the following changes according to your needs.
Adjust behaviour according to your needs.
| File | `cfgs/misc-macros.cfg` |
| -------- | ---------------------------------- |
@@ -284,28 +280,28 @@ Make the following changes according to your needs.
| Disable | `0` (default) |
| Enable | `1` |
##### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
### My filament runout sensor works, but I just started a print without any filament loaded. What gives?
A simple runout sensor can only detect a change in state. So, if you start a print without filament loaded, the printer will not know that there is no filament loaded. You should test your sensor by having filament loaded, starting a print, then cutting the filament. The expected behaviour is that the print will pause, and as long as you have beeping enabled, you will hear 3 annoying beeps.
##### What happens when I put in `M600`/colour change at a certain layer?
### What happens when I put in `M600`/colour change at a certain layer?
1. The printer will beep 3 times (not annoyingly).
2. Printing will stop.
3. The printhead will park itself front center.
4. The hotend will turn off, but the bed will remain hot.
##### What happens when I pause a print?
### What happens when I pause a print?
Same behaviour as `M600`/colour change _except_ there won't be any beeping.
##### What happens when filament runs out?
### What happens when filament runs out?
_If_ you have a working filament sensor, the same behaviour as `M600`/colour change will occur _except_ the beeps will be fairly annoying.
##### How do I resume a print after a colour change or filament runout?
### How do I resume a print after a colour change or filament runout?
⚠️ _Do not disable the stepper motors during this process!_
⚠️ Do not disable the stepper motors during this process!
The printhead is now parked front center waiting for you to insert filament. You will:
@@ -316,7 +312,7 @@ The printhead is now parked front center waiting for you to insert filament. You
- OR, you can push some filament by hand _making sure to first disengage the extruder's spring loaded arm_.
3. Hit resume in your Klipper dashboard.
##### How do I enable KAMP (Klipper Adaptive Meshing & Purging)?
### How do I enable KAMP (Klipper Adaptive Meshing & Purging)?
Although this repo contains all the code from the KAMP repository, only the `mesh` functionality of KAMP has been configured and tested. To enable other functionality, adjust `/cfgs/kamp/KAMP_Settings.cfg`.
@@ -326,7 +322,7 @@ The [Label objects setting](https://docs.mainsail.xyz/overview/features/exclude-
⚠️ KAMP cannot be used with low-powered devices such as the Raspberry Pi Zero.
Adjust according to your needs.
Adjust behaviour according to your needs.
| File | `cfgs/misc-macros.cfg` |
| -------- | ------------------------ |
@@ -335,7 +331,7 @@ Adjust according to your needs.
| Disable | `0` (default) |
| Enable | `1` |
##### How do I use the `TEST_SPEED` macro?
### How do I use the `TEST_SPEED` macro?
⚠️ This is for advanced users only, with well oiled machines. You can cause serious damage to your printer if you're not careful. ☠️ **You have been warned** ☠️.