PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated readme.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-06 07:08:01 -04:00
parent 4c72bfe43e
commit 5ecbfe0cc0
1 changed files with 1 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
README.md
View File

@@ -17,18 +17,6 @@ If you were looking for the OSS Klipper configuration for the **Sovol SV06**, pl
- Load/unload filament macros.
- Purge line macro.
## To do:
- [x] Replace M109/M190 with `TEMPERATURE_WAIT`.
- [x] Get the Ellis `TEST_SPEED` macro working. ⚠️This works on Vorons only!.
- [x] Add information about directory structure.
- [x] Create FAQ section.
- [x] Get filament sensor working.
- [ ] Create topic in Discussion section detailing how users should keep this repository in sync with their own Klipper config using `git`.
- [ ] Explain `PAUSE`/`RESUME` extruder behaviour.
- [ ] Integrate KAMP (Klipper Adaptive Meshing and Purging).
- [x] Add `BEEP` when filament needs changing/`M600`.
## Stay Up-to-Date
I work on this repository all the time and a lot of new features are coming. Watch releases of this repository to be notified for future updates:
@@ -40,11 +28,9 @@ I work on this repository all the time and a lot of new features are coming. Wat
## Before You Begin
- Know what you're getting into by reading this documentation *fully!*
- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via USB.
- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable.
- It is assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
- It is assumed that you already have a working `printer.cfg` and you already have your printer up and running Klipper.
- Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.
- If you see any errors, or encounter any issues, please create an [Issue](https://github.com/bassamanator/Sovol-SV06-firmware/issues/new), or a [Pull request](https://github.com/bassamanator/Sovol-SV06-firmware/pulls).
- I would recommend searching for the word `NOTE` in this repository. There are roughly half a dozen short points amongst the various files that you should be aware of if you're using this configuration.
## Download the Configuration
@@ -151,8 +137,6 @@ A simple runout sensor can only detect a change in state. So, if you start a pri
- https://ellis3dp.com/Print-Tuning-Guide
- https://github.com/strayr/strayr-k-macros
- https://docs.vorondesign.com/build/software/miniE3_v20_klipper.html
- ⭐ https://github.com/spinixguy/Sovol-SV06-firmware
- https://www.printables.com/model/378915-sovol-sv06-buildplate-texture-and-model-for-prusas
- https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles
[![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/H2H0HIHTH)