PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust PS config bundle, and KAMP cfgs.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-19 21:43:23 -05:00
parent 3131370ebf
commit 5bc56228d9
5 changed files with 227 additions and 85 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
cfgs/kamp/Adaptive_Meshing.cfg
View File

@@ -13,12 +13,13 @@ gcode:
{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} # Get bed mesh min from printer.cfg
{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} # Get bed mesh max from printer.cfg
{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} # Get probe count from printer.cfg
{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %} # Pull verbose setting from _KAMP_Settings
{% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %} # Pull probe dockable probe settings from _KAMP_Settings
{% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %} # Pull attach probe command from _KAMP_Settings
{% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %} # Pull detach probe command from _KAMP_Settings
{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %} # Pull mesh margin setting from _KAMP_Settings
{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %} # Pull fuzz amount setting from _KAMP_Settings
{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} # Pull variables from _KAMP_Settings
{% set verbose_enable = kamp_settings.verbose_enable | abs %} # Pull verbose setting from _KAMP_Settings
{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} # Pull probe dockable probe settings from _KAMP_Settings
{% set attach_macro = kamp_settings.attach_macro | string %} # Pull attach probe command from _KAMP_Settings
{% set detach_macro = kamp_settings.detach_macro | string %} # Pull detach probe command from _KAMP_Settings
{% set mesh_margin = kamp_settings.mesh_margin | float %} # Pull mesh margin setting from _KAMP_Settings
{% set fuzz_amount = kamp_settings.fuzz_amount | float %} # Pull fuzz amount setting from _KAMP_Settings
{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} # If probe count is only a single number, convert it to 2. E.g. probe_count:7 = 7,7
{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} # Determine max probe point distance
{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} # Determine max probe point distance
@@ -28,10 +29,10 @@ gcode:
{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} # Set y_max from largest object y point
{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} # Set fuzz_range between 0 and fuzz_amount
{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %} # Adapt x_min to margin and fuzz constraints
{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %} # Adapt y_min to margin and fuzz constraints
{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %} # Adapt x_max to margin and fuzz constraints
{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %} # Adapt y_max to margin and fuzz constraints
{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} # Adapt x_min to margin and fuzz constraints
{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} # Adapt y_min to margin and fuzz constraints
{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} # Adapt x_max to margin and fuzz constraints
{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} # Adapt y_max to margin and fuzz constraints
{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} # Compare adjustments to defaults and choose max
{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} # Compare adjustments to defaults and choose max
@@ -55,6 +56,7 @@ gcode:
{% set points_y = [points_y , probe_count[1]]|min %}
{% if verbose_enable == True %} # If verbose is enabled, print information about KAMP's calculations
{% if printer.exclude_object.objects != [] %}
{ action_respond_info( "Algorithm: {}.".format(
(algorithm),
@@ -99,6 +101,12 @@ gcode:
{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
{% else %}
{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
G4 P5000 # Wait 5 seconds to make error more visible
{% endif %}
{% endif %}
{% if probe_dock_enable == True %}

1
cfgs/kamp/KAMP_Settings.cfg
View File

@@ -1,5 +1,6 @@
# Below you can include specific configuration files depending on what you want KAMP to do:
# NOTE bassamanator: uncomment the functionality that you want to use from KAMP
[include ./Adaptive_Meshing.cfg] # Include to enable adaptive meshing configuration.
# [include ./Line_Purge.cfg] # Include to enable adaptive line purging configuration.
# [include ./Voron_Purge.cfg] # Include to enable adaptive Voron logo purging configuration.

13
cfgs/kamp/Smart_Park.cfg
View File

@@ -1,4 +1,4 @@
[gcode_macro Smart_Park]
[gcode_macro SMART_PARK]
description: Parks your printhead near the print area for pre-print hotend heating.
gcode:
@@ -8,14 +8,18 @@ gcode:
{% set verbose_enable = kamp_settings.verbose_enable | abs %} # Set verbosity
{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} # Create center point of x for fallback
{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} # Create center point of y for fallback
{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} # Gather all object points
{% set x_min = all_points | map(attribute=0) | min | default(center_x) %} # Set x_min from smallest object x point
{% set y_min = all_points | map(attribute=1) | min | default(center_y) %} # Set y_min from smallest object y point
{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} # Set travel speed from config
{% if purge_margin > 0 and x_min != center_x and y_min != center_y %} # If objects are detected and purge margin
{% set x_min = [ x_min - purge_margin , x_min ] | max %} # value is greater than 0, move
{% set y_min = [ y_min - purge_margin , y_min ] | max %} # to purge location + margin
{% set x_min = [ x_min - purge_margin , x_min ] | min %} # value is greater than 0, move
{% set y_min = [ y_min - purge_margin , y_min ] | min %} # to purge location + margin
{% set x_min = [ x_min , axis_minimum_x ] | max %}
{% set y_min = [ y_min , axis_minimum_y ] | max %}
{% endif %}
{% if verbose_enable == True %} # Verbose park location
@@ -27,5 +31,8 @@ gcode:
{% endif %}
{% if printer.toolhead.position.z < z_height %}
G0 Z{z_height} # Move Z to park height if current Z position is lower than z_height
{% endif %}
G0 X{x_min} Y{y_min} F{travel_speed} # Move near object area
G0 Z{z_height} # Move Z to park height

23
cfgs/kamp/Voron_Purge.cfg
View File

@@ -15,12 +15,13 @@ gcode:
{% endif %}
# Get purge settings from _Kamp_Settings
{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
{% set verbose_enable = kamp_settings.verbose_enable | abs %}
{% set purge_height = kamp_settings.purge_height | float %}
{% set tip_distance = kamp_settings.tip_distance | float %}
{% set purge_margin = kamp_settings.purge_margin | float %}
{% set purge_amount = kamp_settings.purge_amount | float %}
{% set flow_rate = kamp_settings.flow_rate | float %}
{% set size = 10 | float %}
# Calculate purge origins and centers from objects
@@ -68,19 +69,19 @@ gcode:
M83 # Relative extrusion mode
G1 E{tip_distance} F{purge_move_speed} # Move tip of filament to nozzle
G1 X{purge_x_origin+size*0.289} Y{purge_y_origin+size} E{purge_amount/4} F{purge_move_speed} # Purge first line of logo
G1 E-.5 F2100 # Retract
{RETRACT} # Retract
G0 Z{purge_height*2} # Z hop
G0 X{purge_x_origin+size*0.789} Y{purge_y_origin+size} # Move to second purge line origin
G0 Z{purge_height} # Move to purge Z height
G1 E.5 F2100 # Recover
{UNRETRACT} # Recover
G1 X{purge_x_origin+size*0.211} Y{purge_y_origin} E{purge_amount/2} F{purge_move_speed} # Purge second line of logo
G1 E-.5 F2100 # Retract
{RETRACT} # Retract
G0 Z{purge_height*2} # Z hop
G0 X{purge_x_origin+size*0.711} Y{purge_y_origin} # Move to third purge line origin
G0 Z{purge_height} # Move to purge Z height
G1 E.5 F2100 # Recover
{UNRETRACT} # Recover
G1 X{purge_x_origin+size} Y{purge_y_origin+size/2} E{purge_amount/4} F{purge_move_speed} # Purge third line of logo
G1 E-.5 F2100 # Retract
{RETRACT} # Retract
G92 E0 # Reset extruder distance
M82 # Absolute extrusion mode
G0 Z{purge_height*2} F{travel_speed} # Z hop

135
misc/PrusaSlicer_config_bundle-SV06-Both.ini
View File

@@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 23:37:05 UTC
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-20 at 02:32:36 UTC
[print:0.20mm QUALITY SV06 Ellis]
avoid_crossing_curled_overhangs = 0
@@ -73,6 +73,7 @@ max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
@@ -249,6 +250,7 @@ max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
@@ -262,7 +264,7 @@ overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0.46
perimeter_generator = classic
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 3
post_process =
@@ -425,6 +427,7 @@ max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
@@ -438,7 +441,7 @@ overhangs = 1
perimeter_acceleration = 1000
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 4
post_process =
@@ -601,6 +604,7 @@ max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
@@ -777,6 +781,7 @@ max_volumetric_speed = 15
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
@@ -907,16 +912,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 8
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -971,16 +981,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -1035,16 +1050,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -1099,16 +1119,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1163,16 +1188,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = 0.6
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1227,16 +1257,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = 0.8
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1291,16 +1326,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = 0.8
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1355,16 +1395,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = 25
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -1419,16 +1464,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1483,16 +1533,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1547,16 +1602,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1611,16 +1671,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = 30
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -1675,16 +1740,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -1739,16 +1809,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = "- Original print temp was 235.\n- Retraction lenght was 0.3."
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = 30
filament_settings_id = "Generic FLEX"
filament_soluble = 0
@@ -1803,16 +1878,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = 0.1
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1867,16 +1947,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 15
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1931,16 +2016,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -1995,16 +2085,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.7
filament_retract_length_toolchange = nil
filament_retract_lift = 0.6
filament_retract_lift_above = 0.26
filament_retract_lift_below = 250
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -2059,16 +2154,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.6
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = 25
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -2123,16 +2223,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -2187,16 +2292,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";max fan speed changed from 0 to 100"
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
@@ -2251,16 +2361,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -2315,16 +2430,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -2379,16 +2499,21 @@ filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ";Full spool weight: 1280g"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = "ABS - KVP"
filament_soluble = 0
@@ -2580,7 +2705,7 @@ z_offset = 0
[physical_printer:Local SV06]
host_type = octoprint
preset_name = Sovol SV06
preset_name =
preset_names = "Sovol SV06"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -2594,7 +2719,7 @@ printhost_user =
[physical_printer:Local SV06 Plus]
host_type = octoprint
preset_name = Sovol SV06 Plus
preset_name =
preset_names = "Sovol SV06 Plus"
print_host = http://10.0.0.51
printer_technology = FFF