From 5b5c58fa059f69790560d3917c4162f3268c3dc1 Mon Sep 17 00:00:00 2001 From: Bassam Husain Date: Sat, 26 Aug 2023 15:49:26 -0400 Subject: [PATCH] Adjust readme.md: add note about disabling usb 5v pin. --- .vscode/settings.json | 1 + README.md | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/.vscode/settings.json b/.vscode/settings.json index b5a1281..7ba8623 100644 --- a/.vscode/settings.json +++ b/.vscode/settings.json @@ -8,6 +8,7 @@ "cSpell.words": [ "ADXL", "blanchas", + "Buildplate", "cfgs", "Fluidd", "Fluiddpi", diff --git a/README.md b/README.md index f6634d0..6399eed 100644 --- a/README.md +++ b/README.md @@ -66,8 +66,9 @@ Although I've made switching over to Klipper as easy as is possible, it can stil - Follow the steps in order. - If an error was reported at a step, do no proceed to the next step. - It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking. +- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/parts/README.md#put-tape-on-the-5v-pin) the USB cable's 5V pin. - It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`. -- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [~~FluiddPI~~](https://docs.fluidd.xyz/installation/fluiddpi#download) (⚠️ `FluiddPI` is not under active maintenance) or [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). +- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh). - Robert Redford's performance in _Spy Game (2001)_ was superb! - It is assumed that there is one instance of Klipper installed. If you have multiple instances of Klipper installed, via `KIAUH` for example, then this guide is not for you. You can still use all the configs of course, but the steps in this guide will likely not work for you. - Your question has probably been answered already, but if it hasn't, please post in the [Discussion](https://github.com/bassamanator/Sovol-SV06-firmware/discussions) section.