PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Removed bed_screws locations from plus. Enabled filament sensor. Adjusted safe_z_home.

Browse Source
This commit is contained in:
Bassam Husain
2023-04-02 19:50:24 -04:00
parent 060a9334ee
commit 5afbf002c2
2 changed files with 35 additions and 36 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
cfgs/misc-macros.cfg
View File

@@ -20,7 +20,7 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
[gcode_macro _globals]
variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 0 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_pre_purge_prime_length: 1.4
gcode:
@@ -75,17 +75,34 @@ gcode:
{% endif %}
[gcode_macro PURGE_LINE]
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G0 Y0 X0 F4000 ; go to tongue of print bed
G1 Z0.4 F500.0 ; move bed to nozzle
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
{% set extrudeAmount = 26.6 %}
{% set movementLength = 100.0 %}
{% set movementSpeed = 15 * 60 %}
{% set xStart = 0.5 %}
{% set yStart = 0.5 %}
# Set safe speeds
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
G92 E0.0 ; reset extruder
G90 ; Absolute positioning
G0 X{xStart} Y{yStart} F{maxVelocityAdjusted} ; move to purge position
G1 Z0.4 F500.0 ; move to purge height
M83 ; Relative extrusion mode
G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
G1 Y140 E35.0 F1200.0 ; intro line 1
G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1
#G1 E-.5 F2100 # Retract
G92 E0.0 ; reset extruder
M82 ; Absolute extrusion mode
G1 Z5.0 ; move nozzle to prevent scratch
[gcode_macro CANCEL_PRINT]
@@ -123,13 +140,20 @@ gcode:
[gcode_macro PRINT_END]
gcode:
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500 ; NOTE Comment out this line to stop the beeps at the end of a print
CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-{PRE_PURGE_PRIME_LENGTH} F400 ; retract filament
G91 ; relative positioning
# Set safe speeds
{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set zVelocityAdjusted = (0.95 * zVelocity * 60)|int %}
{% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
@@ -155,8 +179,8 @@ gcode:
{% set z_safe = max_z - printer.toolhead.position.z %}
{% endif %}
G0 Z{z_safe} F2000 ; move nozzle up
G0 X{x_safe} Y{y_safe} F9000 ; move nozzle to remove stringing
G0 Z{z_safe} F{zVelocityAdjusted} ; move nozzle up
G0 X{x_safe} Y{y_safe} F{maxVelocityAdjusted} ; move nozzle to remove stringing
TURN_OFF_HEATERS
M107 ; turn off fan
G90 ; absolute positioning

29
printer.cfg
View File

@@ -153,7 +153,7 @@ samples_tolerance: 0.01
samples_tolerance_retries: 5
[safe_z_home]
home_xy_position: 84.50, 135 # NOTE The probe is at the center of the bed.
home_xy_position: 123, 170
speed: 100.0
z_hop: 10
z_hop_speed: 15
@@ -188,32 +188,7 @@ pin: PA0
# encoder_pins: ^PB14, ^PB10
# click_pin: ^!PB2
[bed_screws]
screw1: 26.5, 31
screw1_name: front left
screw2: 196.75, 31
screw2_name: front right
screw3: 196.75, 201
screw3_name: back right
screw4: 26.5, 201
screw4_name: back left
[screws_tilt_adjust]
screw1: 111.5, 116.5
screw1_name: center
screw2: 26.5, 31
screw2_name: front left
screw3: 196.75, 31
screw3_name: front right
screw4: 196.75, 201
screw4_name: back right
screw5: 26.5, 201
screw5_name: back left
speed: 50
horizontal_move_z: 10
screw_thread: CCW-M4
# NOTE The speaker will probably not work, since the LCD apparently doesn't work with Klipper
# NOTE The speaker will not work, since the screen doesn't
# [output_pin beeper]
# pin: PC6
# value: 0