PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into sv06-plus

Browse Source
This commit is contained in:
Bassam Husain
2023-12-01 13:59:21 -05:00
parent c544c811be 6e37894134
commit 5a906faa0e
2 changed files with 937 additions and 113 deletions
Download Patch File Download Diff File Expand all files Collapse all files

560
misc/PrusaSlicer_config_bundle-SV06-Both.ini → misc/PrusaSlicer_config_bundle-SV06-SV07-All.ini
View File

@@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-11-23 at 18:53:35 UTC
# generated by PrusaSlicer 2.6.1+linux-x64-GTK3 on 2023-12-01 at 18:05:53 UTC
[print:0.20mm QUALITY SV06 Ellis]
avoid_crossing_curled_overhangs = 0
@@ -708,6 +708,183 @@ wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_Decorative_Standard_24mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 5000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 4000
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 1000
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.46
fill_angle = 45
fill_density = 10%
fill_pattern = monotonic
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.26
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 7000
infill_anchor = 600%
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.46
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 24
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_extrusion_width = 0.46
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 3
post_process =
print_settings_id = Ellis - Decorative Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 5000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 10000
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_PIF_Standard_15mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
@@ -885,6 +1062,183 @@ wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:_Ellis_PIF_Standard_24mm3_CoreXY-Speeds]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
bridge_acceleration = 5000
bridge_angle = 0
bridge_flow_ratio = 0.85
bridge_speed = 140
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 4000
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 1000
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 80
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.46
fill_angle = 45
fill_density = 40%
fill_pattern = grid
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.26
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0
gcode_substitutions =
infill_acceleration = 7000
infill_anchor = 600%
infill_anchor_max = 400%
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.64
infill_first = 0
infill_overlap = 25%
infill_speed = 300
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 24
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 20
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
overhang_speed_0 = 75%
overhang_speed_1 = 80%
overhang_speed_2 = 90%
overhang_speed_3 = 100%
overhangs = 1
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = arachne
perimeter_speed = 150
perimeters = 4
post_process =
print_settings_id = Ellis - PIF Standard (15mm³)
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 30
solid_infill_acceleration = 5000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.56
solid_infill_speed = 200
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 120
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 1
threads = 16
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 60
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 10000
travel_speed = 300
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[filament:Basic PETG]
bed_temperature = 70
bridge_fan_speed = 100
@@ -2543,8 +2897,8 @@ temperature = 210
[printer:Sovol SV06]
autoemit_temperature_commands = 1
bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,223x0,223x223,0x223
before_layer_gcode =
between_objects_gcode =
@@ -2624,8 +2978,8 @@ z_offset = 0
[printer:Sovol SV06 Plus]
autoemit_temperature_commands = 1
bed_custom_model = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/SV06BuildPlate.stl
bed_custom_texture = /home/bassam/3dprinter/_tools/Ellis-SuperSlicer-Profiles/misc/sv06/sv06-buildplate-better.png
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode =
between_objects_gcode =
@@ -2703,9 +3057,171 @@ variable_layer_height = 1
wipe = 0
z_offset = 0
[printer:Sovol SV07]
autoemit_temperature_commands = 1
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,220x0,220x220,0x220
before_layer_gcode =
between_objects_gcode =
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MK3
deretract_speed = 40
end_gcode = PRINT_END
extra_loading_move = -2
extruder_colour = #FFE3CA
extruder_offset = 0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = octoprint
inherits =
layer_gcode =
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 250
min_layer_height = 0.04
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = PAUSE
print_host =
printer_model =
printer_notes =
printer_settings_id = Sovol Sv06
printer_technology = FFF
printer_variant = 0.4
printer_vendor =
printhost_apikey =
printhost_cafile =
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.5
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0.2
retract_lift_below = 250
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\n; PURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
template_custom_gcode =
thumbnails = 32x32,400x300
thumbnails_format = PNG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
[printer:Sovol SV07 Plus]
autoemit_temperature_commands = 1
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode =
between_objects_gcode =
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MK3
deretract_speed = 40
end_gcode = PRINT_END
extra_loading_move = -2
extruder_colour = #FFE3CA
extruder_offset = 0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = octoprint
inherits =
layer_gcode =
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 350
min_layer_height = 0.04
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = PAUSE
print_host =
printer_model =
printer_notes =
printer_settings_id = Sovol Sv06
printer_technology = FFF
printer_variant = 0.4
printer_vendor =
printhost_apikey =
printhost_cafile =
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.5
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0.2
retract_lift_below = 250
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\r\nM140 S0\nM117\r\nPRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature[initial_extruder]]\r\n; PURGE_LINE\n\n;; Guide: https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code
template_custom_gcode =
thumbnails = 32x32,400x300
thumbnails_format = PNG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
[physical_printer:Local SV06]
host_type = octoprint
preset_name =
preset_name = Sovol SV06
preset_names = "Sovol SV06"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -2719,7 +3235,7 @@ printhost_user =
[physical_printer:Local SV06 Plus]
host_type = octoprint
preset_name =
preset_name = Sovol SV06 Plus
preset_names = "Sovol SV06 Plus"
print_host = http://10.0.0.51
printer_technology = FFF
@@ -2731,8 +3247,36 @@ printhost_port =
printhost_ssl_ignore_revoke = 0
printhost_user =
[physical_printer:Local SV07]
host_type = octoprint
preset_name = Sovol SV07
preset_names = "Sovol SV07"
print_host = http://10.0.0.51
printer_technology = FFF
printhost_apikey =
printhost_authorization_type = key
printhost_cafile =
printhost_password =
printhost_port =
printhost_ssl_ignore_revoke = 0
printhost_user =
[physical_printer:Local SV07 Plus]
host_type = octoprint
preset_name = Sovol SV07 Plus
preset_names = "Sovol SV07 Plus"
print_host = http://10.0.0.51
printer_technology = FFF
printhost_apikey =
printhost_authorization_type = key
printhost_cafile =
printhost_password =
printhost_port =
printhost_ssl_ignore_revoke = 0
printhost_user =
[presets]
print = Ellis_Decorative_Standard_15mm3
print = _Ellis_PIF_Standard_15mm3_CoreXY-Speeds
sla_print =
sla_material =
printer = Sovol SV06

490
misc/SuperSlicer_config_bundle-SV06-Both.ini → misc/SuperSlicer_config_bundle-SV06-SV07-All.ini
View File

File diff suppressed because it is too large Load Diff