diff --git a/printer.cfg b/printer.cfg
index 3fd7ccf..4765ba2 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -156,6 +156,11 @@ fade_start: 1
 fade_end: 10
 fade_target: 0
 
+[axis_twist_compensation]
+calibrate_start_x: 27
+calibrate_end_x: 222
+calibrate_y: 135
+
 #####################################################################
 #   Fans
 #####################################################################
@@ -241,63 +246,6 @@ runout_gcode:
 #*# [probe]
 #*# z_offset = 1.610
 #*#
-#*# [bed_mesh newbed]
-#*# version = 1
-#*# points =
-#*# 	-0.240625, -0.114375, -0.018750, 0.004375, 0.092500
-#*# 	-0.280625, -0.120000, -0.005000, 0.025000, -0.011250
-#*# 	-0.330625, -0.151875, -0.035000, -0.006875, 0.011250
-#*# 	-0.350625, -0.145000, -0.030000, 0.001875, 0.073125
-#*# 	-0.353125, -0.110000, 0.031250, 0.056250, 0.006250
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*#
-#*# [bed_mesh oldbed]
-#*# version = 1
-#*# points =
-#*# 	-0.158750, -0.064375, 0.022500, 0.069375, 0.076875
-#*# 	-0.214375, -0.114375, -0.010625, 0.030625, 0.016875
-#*# 	-0.254375, -0.135625, -0.041875, -0.006250, -0.025000
-#*# 	-0.255000, -0.143750, -0.062500, -0.041250, -0.059375
-#*# 	-0.193125, -0.098750, -0.033750, -0.019375, -0.035625
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*#
-#*# [bed_mesh default-v1]
-#*# version = 1
-#*# points =
-#*# 	-0.181250, -0.127500, -0.082500, -0.086875, -0.124375
-#*# 	-0.182500, -0.123750, -0.063750, -0.069375, -0.132500
-#*# 	-0.190000, -0.106250, -0.056250, -0.067500, -0.128125
-#*# 	-0.185625, -0.100000, -0.042500, -0.063750, -0.128125
-#*# 	-0.133125, -0.045625, 0.000000, -0.019375, -0.079375
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*#
 #*# [bed_mesh personalPreEdit]
 #*# version = 1
 #*# points =
@@ -317,7 +265,12 @@ runout_gcode:
 #*# min_y = 5.0
 #*# max_y = 203.0
 #*#
-#*# [bed_mesh default]
+#*# [axis_twist_compensation]
+#*# z_compensations = 0.069323, -0.046302, -0.023021
+#*# compensation_start_x = 27.0
+#*# compensation_end_x = 222.0
+#*#
+#*# [bed_mesh default-preXTwist-fix]
 #*# version = 1
 #*# points =
 #*# 	-0.150000, -0.110000, -0.110000, -0.130000, -0.130000
@@ -325,6 +278,25 @@ runout_gcode:
 #*# 	-0.165000, -0.112266, -0.110000, -0.130000, -0.130000
 #*# 	-0.160000, -0.105430, -0.110000, -0.130000, -0.130000
 #*# 	-0.120000, -0.071211, -0.091407, -0.110000, -0.110000
+#*# min_x = 27.0
+#*# max_x = 222.0
+#*# min_y = 5.0
+#*# max_y = 203.0
+#*# x_count = 5
+#*# y_count = 5
+#*# mesh_x_pps = 2
+#*# mesh_y_pps = 2
+#*# algo = bicubic
+#*# tension = 0.2
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	  -0.092252, -0.074908, -0.075220, -0.078452, -0.095874
+#*# 	  -0.118502, -0.092720, -0.067252, -0.069702, -0.099781
+#*# 	  -0.145689, -0.085064, -0.057564, -0.057827, -0.071812
+#*# 	  -0.156627, -0.087095, -0.043814, -0.044702, -0.045249
+#*# 	  -0.104752, -0.027720, 0.020873, 0.032016, 0.045532
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2