From 5700b831645c72c7056a2da9eb82665bfa52f589 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Mon, 6 Feb 2023 18:55:17 -0500
Subject: [PATCH] Added screws_tilt_adjust.

---
 printer.cfg | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/printer.cfg b/printer.cfg
index 1b97cdf..11d4697 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -193,6 +193,21 @@ screw3_name: back right
 screw4: 26.5, 201
 screw4_name: back left
 
+[screws_tilt_adjust]
+screw1: 111.5, 116.5
+screw1_name: center
+screw2: 26.5, 31
+screw2_name: front left
+screw3: 196.75, 31
+screw3_name: front right
+screw4: 196.75, 201
+screw4_name: back right
+screw5: 26.5, 201
+screw5_name: back left
+speed: 50
+horizontal_move_z: 10
+screw_thread: CCW-M4
+
 # // NOTE this is the pin for the filament switch, if you have one
 # [filament_switch_sensor fil_sensor]
 # switch_pin: PA4 # "Pulled-high"