Adjust PS config bundle.

misc/PrusaSlicer_config_bundle-SV06.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 19:39:14 UTC
+# generated by PrusaSlicer 2.6.0+linux-x64-GTK3 on 2023-08-23 at 22:47:24 UTC
 
 [print:0.20mm QUALITY SV06 Ellis]
 avoid_crossing_curled_overhangs = 0
@@ -528,6 +528,358 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:_Ellis_Decorative_Standard_15mm3_CoreXY-Speeds]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotoniclines
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 0.85
+bridge_speed = 140
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 4000
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 1000
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 80
+external_perimeters_first = 0
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.46
+fill_angle = 45
+fill_density = 10%
+fill_pattern = monotonic
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.26
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 400%
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.46
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 15
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 20
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+overhang_speed_0 = 75%
+overhang_speed_1 = 80%
+overhang_speed_2 = 90%
+overhang_speed_3 = 100%
+overhangs = 1
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.46
+perimeter_generator = arachne
+perimeter_speed = 150
+perimeters = 3
+post_process = 
+print_settings_id = Ellis - Decorative Standard (15mm³)
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 30
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.56
+solid_infill_speed = 200
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 30%
+thick_bridges = 0
+thin_walls = 1
+threads = 16
+top_fill_pattern = monotoniclines
+top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_speed = 300
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:_Ellis_PIF_Standard_15mm3_CoreXY-Speeds]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotoniclines
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 1
+bridge_acceleration = 5000
+bridge_angle = 0
+bridge_flow_ratio = 0.85
+bridge_speed = 140
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 4000
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 1000
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 80
+external_perimeters_first = 0
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.46
+fill_angle = 45
+fill_density = 40%
+fill_pattern = grid
+first_layer_acceleration = 2000
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.26
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+gcode_resolution = 0
+gcode_substitutions = 
+infill_acceleration = 7000
+infill_anchor = 600%
+infill_anchor_max = 400%
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.64
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 300
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 300
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 15
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 20
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
+overhang_speed_0 = 75%
+overhang_speed_1 = 80%
+overhang_speed_2 = 90%
+overhang_speed_3 = 100%
+overhangs = 1
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_generator = arachne
+perimeter_speed = 150
+perimeters = 4
+post_process = 
+print_settings_id = Ellis - PIF Standard (15mm³)
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 30
+solid_infill_acceleration = 5000
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.56
+solid_infill_speed = 200
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100
+support_material_pattern = rectilinear
+support_material_spacing = 3
+support_material_speed = 120
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 30%
+thick_bridges = 0
+thin_walls = 1
+threads = 16
+top_fill_pattern = monotoniclines
+top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 60
+top_solid_layers = 5
+top_solid_min_thickness = 1
+travel_acceleration = 10000
+travel_speed = 300
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [filament:Basic PETG]
 bed_temperature = 70
 bridge_fan_speed = 100
@@ -2147,7 +2499,7 @@ z_offset = 0
 
 [physical_printer:Sv06]
 host_type = octoprint
-preset_name = 
+preset_name = Sovol Sv06
 preset_names = "Sovol Sv06"
 print_host = http://10.0.0.51/
 printer_technology = FFF