diff --git a/printer.cfg b/printer.cfg
index 2c0e6d5..d4ed16f 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -141,27 +141,27 @@ pin: PB1
 x_offset: 27
 y_offset: -20
 # z_offset: 0
-samples: 5
+samples: 3
 samples_result: median
 samples_tolerance: 0.01
 samples_tolerance_retries: 5
 
 [safe_z_home]
-home_xy_position: 0, 223 # NOTE 111.50,111.50
+home_xy_position: 84.50, 135 # NOTE PROBE is at the center of the bed
 speed: 100.0
 z_hop: 10
 z_hop_speed: 15
 
 [bed_mesh]
-speed: 150
+speed: 175
 mesh_min: 27, 5
-mesh_max: 222, 203 # 196, 203
+mesh_max: 222, 203
 probe_count: 5,5
 algorithm: bicubic
 fade_start: 1
 fade_end: 10
-# NOTE fade_target: 0
-relative_reference_index: 20 # NOTE
+fade_target: 0
+# relative_reference_index: 15
 
 [virtual_sdcard]
 path: /home/pi/printer_data/gcodes
@@ -232,9 +232,9 @@ screw_thread: CCW-M4
 #*# pid_kd = 945.503
 #*#
 #*# [probe]
-#*# z_offset = 1.550
+#*# z_offset = 1.520
 #*#
-#*# [bed_mesh default]
+#*# [bed_mesh default-working]
 #*# version = 1
 #*# points =
 #*# 	0.210625, 0.309375, 0.357500, 0.312500, 0.247500
@@ -242,25 +242,44 @@ screw_thread: CCW-M4
 #*# 	0.184375, 0.328125, 0.420625, 0.428125, 0.378750
 #*# 	0.086250, 0.257500, 0.386250, 0.418750, 0.392500
 #*# 	0.000000, 0.211250, 0.363125, 0.420000, 0.420000
+#*# min_x = 27.0
+#*# max_x = 222.0
+#*# min_y = 5.0
+#*# max_y = 203.0
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2
 #*# mesh_y_pps = 2
 #*# algo = bicubic
 #*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0
 #*#
-#*# [bed_mesh default1]
+#*# [bed_mesh default-v1]
 #*# version = 1
 #*# points =
-#*# 	-0.290000, -0.178125, -0.134375, -0.185625, -0.292500
-#*# 	-0.275000, -0.152500, -0.086250, -0.121250, -0.213125
-#*# 	-0.301250, -0.151875, -0.066250, -0.077500, -0.137500
-#*# 	-0.393750, -0.231875, -0.118125, -0.110000, -0.125625
-#*# 	-0.500000, -0.297500, -0.160625, -0.113125, -0.076875
+#*# 	-0.017708, -0.023125, -0.023542, -0.037500, -0.088750
+#*# 	-0.034167, -0.051875, -0.035833, -0.037708, -0.091875
+#*# 	-0.072500, -0.066875, -0.056042, -0.050208, -0.093333
+#*# 	-0.075417, -0.074167, -0.051458, -0.054375, -0.095625
+#*# 	-0.030833, -0.014583, -0.000625, -0.013333, -0.051667
+#*# min_x = 27.0
+#*# max_x = 222.0
+#*# min_y = 5.0
+#*# max_y = 203.0
+#*# x_count = 5
+#*# y_count = 5
+#*# mesh_x_pps = 2
+#*# mesh_y_pps = 2
+#*# algo = bicubic
+#*# tension = 0.2
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	0.094792, 0.076250, 0.085208, 0.068333, 0.012083
+#*# 	0.077917, 0.054375, 0.067500, 0.060208, 0.003542
+#*# 	0.038958, 0.037292, 0.043750, 0.049583, 0.006458
+#*# 	0.028333, 0.030000, 0.042292, 0.040000, 0.000000
+#*# 	0.068958, 0.078542, 0.091250, 0.076458, 0.033958
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2