PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Bed temp over now customizable.

Browse Source
This commit is contained in:
Bassam Husain
2023-06-09 17:32:28 -04:00
parent 7e45ae0f2d
commit 3cd751ba8d
1 changed files with 6 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
cfgs/misc-macros.cfg
View File

@@ -28,11 +28,13 @@ gcode:
[gcode_macro _globals] [gcode_macro _globals]
variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected variable_filament_sensor_enabled: 0 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_pre_purge_prime_length: 1.4 variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
variable_pre_purge_prime_length: 1.40
gcode: gcode:
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=pre_purge_prime_length VALUE={ variable_pre_purge_prime_length }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=filament_sensor_enabled VALUE={ variable_filament_sensor_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled } SET_GCODE_VARIABLE MACRO=_globals VARIABLE=beeping_enabled VALUE={ variable_beeping_enabled }
SET_GCODE_VARIABLE MACRO=_globals VARIABLE=bed_temp_over VALUE={ variable_bed_temp_over }
[gcode_macro CONDITIONAL_BEEP] [gcode_macro CONDITIONAL_BEEP]
gcode: gcode:
@@ -129,7 +131,7 @@ gcode:
# Other variables # Other variables
{% set bedtempSlicer = bedtemp %} {% set bedtempSlicer = bedtemp %}
{% set bedtempRange = 10 %} {% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %} {% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %} {% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %}
@@ -142,9 +144,9 @@ gcode:
{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %} {% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %} {% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
# If bed-temp-almost is higher than bed-temp by a maximum of 10C # If bed-temp-almost is higher than bed-temp by a maximum of bed-temp-over
{% if bedtempAlmost > bedtemp %} {% if bedtempAlmost > bedtemp %}
{% if (bedtempAlmost - bedtempRange) <= bedtemp %} {% if (bedtempAlmost - bedtempOver) <= bedtemp %}
{% set bedtemp = bedtempAlmost %} {% set bedtemp = bedtempAlmost %}
{% endif %} {% endif %}
{% endif %} {% endif %}