From 770a9976e1b3794babfd080f901fe45eb08c2140 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Sat, 4 Feb 2023 06:42:16 -0500
Subject: [PATCH 1/2] Mesh cleanup.

---
 printer.cfg | 29 +++++------------------------
 1 file changed, 5 insertions(+), 24 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index e2726ca..68c9865 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -216,11 +216,11 @@ shaper_type_y: 3hump_ei
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.210625, 0.309375, 0.357500, 0.312500, 0.247500
-#*# 	  0.218125, 0.330000, 0.409375, 0.385625, 0.313750
-#*# 	  0.184375, 0.328125, 0.420625, 0.428125, 0.378750
-#*# 	  0.086250, 0.257500, 0.386250, 0.418750, 0.392500
-#*# 	  0.000000, 0.211250, 0.363125, 0.420000, 0.420000
+#*# 	0.210625, 0.309375, 0.357500, 0.312500, 0.247500
+#*# 	0.218125, 0.330000, 0.409375, 0.385625, 0.313750
+#*# 	0.184375, 0.328125, 0.420625, 0.428125, 0.378750
+#*# 	0.086250, 0.257500, 0.386250, 0.418750, 0.392500
+#*# 	0.000000, 0.211250, 0.363125, 0.420000, 0.420000
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2
@@ -250,22 +250,3 @@ shaper_type_y: 3hump_ei
 #*# max_x = 222.0
 #*# min_y = 5.0
 #*# max_y = 203.0
-#*#
-#*# [bed_mesh default2]
-#*# version = 1
-#*# points =
-#*# 	  0.210625, 0.331875, 0.386250, 0.321875, 0.225000
-#*# 	  0.232500, 0.363125, 0.450000, 0.417500, 0.325000
-#*# 	  0.204375, 0.366250, 0.460000, 0.460000, 0.396250
-#*# 	  0.108750, 0.295625, 0.419375, 0.445000, 0.403125
-#*# 	  0.000000, 0.223750, 0.382500, 0.432500, 0.419375
-#*# x_count = 5
-#*# y_count = 5
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 27.0
-#*# max_x = 222.0
-#*# min_y = 5.0
-#*# max_y = 203.0

From 09c90890adfa9ca6131437e91681b316953af6dc Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Sat, 4 Feb 2023 08:41:35 -0500
Subject: [PATCH 2/2] Removed mcu temp section.

---
 printer.cfg | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index 68c9865..225dd2f 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -167,8 +167,8 @@ relative_reference_index: 20 # NOTE
 [virtual_sdcard]
 path: /home/pi/printer_data/gcodes
 
-[temperature_sensor mcu_temp]
-sensor_type: temperature_mcu
+# [temperature_sensor mcu_temp]
+# sensor_type: temperature_mcu
 
 [temperature_sensor raspberry_pi]
 sensor_type: temperature_host