From 2972ed0d0af012e6c60a81fcbd8e2b31cf6ef5b0 Mon Sep 17 00:00:00 2001
From: Bassam Husain <bassam.husain@gmail.com>
Date: Mon, 6 Feb 2023 17:58:30 -0500
Subject: [PATCH] Added bed_screws.

---
 printer.cfg | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/printer.cfg b/printer.cfg
index 42b4495..1b97cdf 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -183,6 +183,16 @@ shaper_type_x: mzv
 shaper_freq_y = 59.0
 shaper_type_y: 3hump_ei
 
+[bed_screws]
+screw1: 26.5, 31
+screw1_name: front left
+screw2: 196.75, 31
+screw2_name: front right
+screw3: 196.75, 201
+screw3_name: back right
+screw4: 26.5, 201
+screw4_name: back left
+
 # // NOTE this is the pin for the filament switch, if you have one
 # [filament_switch_sensor fil_sensor]
 # switch_pin: PA4 # "Pulled-high"