diff --git a/printer.cfg b/printer.cfg
index 01aeb32..c01769d 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -233,15 +233,15 @@ runout_gcode:
 #*#
 #*# [extruder]
 #*# control = pid
-#*# pid_kp = 21.766
-#*# pid_ki = 1.395
-#*# pid_kd = 84.888
+#*# pid_kp = 23.147
+#*# pid_ki = 1.559
+#*# pid_kd = 85.934
 #*#
 #*# [heater_bed]
 #*# control = pid
-#*# pid_kp = 67.629
-#*# pid_ki = 1.288
-#*# pid_kd = 887.637
+#*# pid_kp = 68.957
+#*# pid_ki = 1.281
+#*# pid_kd = 928.332
 #*#
 #*# [probe]
 #*# z_offset = 1.690
@@ -287,11 +287,11 @@ runout_gcode:
 #*# [bed_mesh default-v1]
 #*# version = 1
 #*# points =
-#*# 	  -0.219375, -0.138125, -0.072500, -0.067500, -0.108750
-#*# 	  -0.208125, -0.140625, -0.065625, -0.053125, -0.111250
-#*# 	  -0.220000, -0.124375, -0.058750, -0.051250, -0.100625
-#*# 	  -0.224375, -0.121250, -0.046250, -0.049375, -0.097500
-#*# 	  -0.184375, -0.072500, -0.006875, -0.008125, -0.043125
+#*# 	-0.219375, -0.138125, -0.072500, -0.067500, -0.108750
+#*# 	-0.208125, -0.140625, -0.065625, -0.053125, -0.111250
+#*# 	-0.220000, -0.124375, -0.058750, -0.051250, -0.100625
+#*# 	-0.224375, -0.121250, -0.046250, -0.049375, -0.097500
+#*# 	-0.184375, -0.072500, -0.006875, -0.008125, -0.043125
 #*# min_x = 27.0
 #*# max_x = 222.0
 #*# min_y = 5.0
@@ -306,11 +306,11 @@ runout_gcode:
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  -0.181250, -0.127500, -0.082500, -0.086875, -0.124375
-#*# 	  -0.182500, -0.123750, -0.063750, -0.069375, -0.132500
-#*# 	  -0.190000, -0.106250, -0.056250, -0.067500, -0.128125
-#*# 	  -0.185625, -0.100000, -0.042500, -0.063750, -0.128125
-#*# 	  -0.133125, -0.045625, 0.000000, -0.019375, -0.079375
+#*# 	-0.181250, -0.127500, -0.082500, -0.086875, -0.124375
+#*# 	-0.182500, -0.123750, -0.063750, -0.069375, -0.132500
+#*# 	-0.190000, -0.106250, -0.056250, -0.067500, -0.128125
+#*# 	-0.185625, -0.100000, -0.042500, -0.063750, -0.128125
+#*# 	-0.133125, -0.045625, 0.000000, -0.019375, -0.079375
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2