PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Removed CHECK_PRE_PURGE_PRIME_LENGTH

Browse Source 
macro.
This commit is contained in:
Bassam Husain
2023-03-12 14:35:13 -04:00
parent c17c5545db
commit 150e1b7425
1 changed files with 3 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
cfgs/misc-macros.cfg
View File

@@ -52,13 +52,6 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %}
[gcode_macro CHECK_PRE_PURGE_PRIME_LENGTH]
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length %}
{% if not PRE_PURGE_PRIME_LENGTH %}
{action_raise_error('Pre purge prime length not found')}
{% endif %}
[gcode_macro M109]
rename_existing: M99109
gcode:
@@ -85,8 +78,8 @@ gcode:
# https://github.com/JoeCat1207/V0.1-Purge-line-SuperSlicer/blob/main/Purgeline.txt
# https://github.com/VoronDesign/Voron-Switchwire/blob/200cdae033c59ef81f67c4235469da7ca66d53a1/Firmware/skr_mini_e3_v2_config.cfg
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length %}
CHECK_PRE_PURGE_PRIME_LENGTH
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
G0 Y0 X0 F4000 ; go to tongue of print bed
G1 Z0.4 F500.0 ; move bed to nozzle
G92 E0.0 ; reset extruder
@@ -112,7 +105,6 @@ gcode:
{% set chambertemp = params.CHAMBER|default(0)|int %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1
G28 X Y
# <insert your routines here>
@@ -131,7 +123,6 @@ gcode:
[gcode_macro PRINT_END]
gcode:
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500 ; NOTE Comment out this line to stop the beeps at the end of a print
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
M400 ; wait for buffer to clear
@@ -200,7 +191,7 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} ; set hotend temp variable for reference in resume macro
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print
{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %} ; check that zhop doesn't exceed z max
@@ -227,7 +218,6 @@ gcode:
{% if printer['pause_resume'].is_paused|int == 1 %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
{% if etemp > 0 %}