PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 21:41:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into sv06-plus

Browse Source
This commit is contained in:
Bassam Husain
2023-11-19 17:34:37 -05:00
parent 7516f847fe fddbbc2acc
commit 094fd2722f
1 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
README.md
View File

@@ -39,7 +39,7 @@ I am creating these files for my personal use and cannot be held responsible for
- Filament runout sensor usage implemented.
- Minimum configuration settings for Mainsail/Fluiddpi to work.
- A SuperSlicer config bundle that contains the printer configurations for the SV06/Plus, as well as what are considered by many to be the best print settings available for any FDM printer ([Ellis' SuperSlicer Profiles](https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles)).
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> A PrusaSlicer config bundle based on Ellis' SuperSlicer Profiles.
- `NEW` <img src="./images/party_blob.gif" width="20" alt='dancing blob'/> A PrusaSlicer config bundle based on Ellis' SuperSlicer Profiles.
- Bed model and texture to use in SuperSlicer/PrusaSlicer.
- Macros
- **Improved** mechanical gantry calibration/`G34` macro that provides the user audio feedback, and time to check the calibration.
@@ -47,8 +47,8 @@ I am creating these files for my personal use and cannot be held responsible for
- Parking macros (parks the printhead at various locations): `PARKFRONT`, `PARKFRONTLOW`, `PARKREAR`, `PARKCENTER`, `PARKBED`.
- Load/unload filament macros.
- `PURGE_LINE` macro.
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro).
- `NEW` <img src="./images/party_blob.gif" width="20" alt=''/> Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging).
- `NEW` <img src="./images/party_blob.gif" width="20" alt='dancing blob'/> `TEST_SPEED` macro. Find instructions [here](#how-do-i-use-the-test_speed-macro).
- `NEW` <img src="./images/party_blob.gif" width="20" alt='dancing blob'/> Klipper Adaptive Meshing & Purging (KAMP) added (disabled by default)! Read about it [here](#how-do-i-enable-kamp-klipper-adaptive-meshing--purging).
## Stay Up-to-Date
@@ -69,8 +69,8 @@ Although I've made switching over to Klipper as easy as is possible, it can stil
- Make sure your printer is in good physical condition, because print and travel speeds will be _a lot faster_ than they were before. Beginner's would be wise to go through the steps mentioned [here](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md). Consider yourself warned.
- Follow the steps in order.
- If an error was reported at a step, do no proceed to the next step.
- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. Note that most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/initialsteps.md#disable-usb-cable-5v-pin) the USB cable's 5V pin.
- It is assumed that you are connected to your host Raspberry Pi (or other host device) via SSH, and that your printer motherboard is connected to the host via a data USB cable. 💡 Most of the micro USB cables that you find at home are _unlikely_ to be data cables, and it's not possible to tell just by looking.
- [Disable](https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#disable-usb-cable-5v-pin) the USB cable's 5V pin.
- It is also assumed that the username on the host device is `pi`. If that is not the case, you will have to manually edit `moonraker.conf` and `cfgs/misc-macros.cfg` and change any mentions of `/home/pi` to `/home/yourUserName`.
- Klipper _must_ be installed on the host Raspberry Pi for everything to work. Easiest is to use a [MainsailOS](https://github.com/mainsail-crew/mainsail/releases/latest) image. Alternatively, you can install `Fluidd` or `Mainsail` via [KIAUH](https://github.com/th33xitus/kiauh).
- Robert Redford's performance in _Spy Game (2001)_ was superb!
@@ -89,7 +89,8 @@ Please note:
- For the sake of simplicity, I will refer to the klipper firmware file as `klipper.bin` even though the actual filename is something along the lines of `klipper-v0.11.0-148-g52f4e20c.bin`.
- The firmware file is located in the `misc` folder.
- Flashing will only work if current firmware filename is _different from previous flashing procedure_. The `.bin` is also important.
- Many users have reported having issues flashing Klipper using the Sovol microSD card.
- You may find this [video](https://youtu.be/p6l253OJa34) useful.
- ⚠️ Many users have reported having issues flashing Klipper using the Sovol microSD card.
#### 1. Prepare the microSD Card for Flashing with These Parameters
@@ -107,9 +108,7 @@ Please note:
5. Turn on the printer and wait a minute (usually takes 10 seconds).
6. Turn off the printer and remove the microSD.
At this point, it's not possible to tell with certainty whether your flash was successful, continue on with the guide.
You may find this [video](https://youtu.be/p6l253OJa34) useful.
⏲️ At this point, it's not possible to tell with certainty whether your flash was successful, continue on with the guide.
### Download OSS Klipper Configuration
@@ -139,10 +138,9 @@ You can choose _either_ of the 2 following methods.
`lrwxrwxrwx 13 root root 22 Apr 11:10 usb-1a86_USB2.0-Serial-if00-port0 -> ../../ttyUSB0`.
2. `usb-1a86_USB2.0-Serial-if00-port0` is the relevant part.
3. Therefore, the full path to your `mcu` is either `/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0` or `/dev/serial/by-path/usb-1a86_USB2.0-Serial-if00-port0`, depending on the command you used to find the `mcu`.
2. Adjust the `[mcu]` section in `printer.cfg` accordingly.
This is just an _example_ `mcu` section:
2. Adjust the `[mcu]` section in `printer.cfg` accordingly. 🗒️ This is just an **example**:
```
```yaml
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
restart_method: command
@@ -160,7 +158,7 @@ If the Klipper flash that you did earlier was successful, and you've done everyt
💡 I recommend no filament be loaded for any of these steps.
💡 Find explanations for gcode commands at [https://marlinfw.org/](https://marlinfw.org/) and [https://www.klipper3d.org/](https://www.klipper3d.org/G-Codes.html).
🗒️ Find explanations for gcode commands at [https://marlinfw.org/](https://marlinfw.org/) and [https://www.klipper3d.org/](https://www.klipper3d.org/G-Codes.html).
You will be pasting/typing these commands into the Mainsail/Fluidd console.
@@ -185,15 +183,17 @@ You will be pasting/typing these commands into the Mainsail/Fluidd console.
1. `DO_CREATE_MESH`
2. `SAVE_CONFIG` (once completed)
If you've made it here, then your printer has been Klipperized, and is ready to print!
🏁 If you've made it here, then your printer has been Klipperized, and is ready to print! 🏁
But first, adjust your slicer.
## Adjust Your Slicer
💡 If you are using the config bundles found on this repo, you can skip this step.
You need to adjust the start and end gcode in your slicer. The relevant macros are `PRINT_START` and `PRINT_END`. Find instructions [here](https://ellis3dp.com/Print-Tuning-Guide/articles/passing_slicer_variables.html#slicer-start-g-code).
If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. ⚠️ This is just an **example**:
If you would like to print a purge line before your print starts, at the end of your start gcode, on a new line add `PURGE_LINE`. 🗒️ This is just an **example**:
```
PRINT_START ...