PublicArchives/Sovol-SV06-firmware
1
0
Fork 0
mirror of https://github.com/bassamanator/Sovol-SV06-firmware.git synced 2025-11-08 13:31:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Adjust readme.

Browse Source
This commit is contained in:
Bassam Husain
2023-11-27 04:30:43 -05:00
parent 360d861498
commit 04d920c7ee
1 changed files with 4 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@@ -18,6 +18,7 @@ I am creating these files for my personal use and cannot be held responsible for
- [Preface](#preface) - [Preface](#preface)
- [Before You Begin](#before-you-begin) - [Before You Begin](#before-you-begin)
- [Klipper Installation](#klipper-installation) - [Klipper Installation](#klipper-installation)
- [Flash Firmware](#flash-firmware)
- [Download OSS Klipper Configuration](#download-oss-klipper-configuration) - [Download OSS Klipper Configuration](#download-oss-klipper-configuration)
- [Setup Instructions](#setup-instructions) - [Setup Instructions](#setup-instructions)
- [Initial Steps](#initial-steps) - [Initial Steps](#initial-steps)
@@ -155,8 +156,10 @@ You will be pasting/typing these commands into the Mainsail/Fluidd console.
1. `G28` 1. `G28`
2. `G90` 2. `G90`
3. `G1 X{insert_X_position_max_here} F3000` 3. `G1 X{insert_X_position_max_here} F3000`
- Example `G1 X223 F3000`
4. `G1 Y{insert_Y_position_max_here} F3000` 4. `G1 Y{insert_Y_position_max_here} F3000`
2. _This step is optional_. Do a mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. ~~You will hear a succession of beeps.~~ - Example `G1 Y223 F3000`
2. _This step is optional_: do this step if the official firmware for your printer has this as an option. Mechanical gantry calibration; `G34`. After the controlled collision against the beam at the top, there will be a 10 second pause for you to verify that both sides of the gantry are pressed up against the `stoppers` at the top. ~~You will hear a succession of beeps.~~
1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary. 1. Figure out your `Z` `position_max` by baby stepping your way up to the beam, and adjust `position_max`, if necessary.
3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at. 3. PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at.
1. `PID_TEST_BED TEMP=70` 1. `PID_TEST_BED TEMP=70`